PartsTable
Technical Data Sheet
PartsTable / MRO / 61335
61335 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HEAD,DENTAL HANDPIECE is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE OVERALL, body_style: ROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE, hole_diameter: 0.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.500 INCHES NOMINAL IN, overall_length: 0.690 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, overall_diameter: 0.312 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-318-3608, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 61335
NSN: 5330-00-318-3608
FSC: 5330
CAGE: 51228 — ECOLAIRE INC BALDWIN-HAMILTON CO DIV (USA)
SPECIFICATIONS
materialPAPER AND GLUE OVERALL
body_styleROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE
hole_diameter0.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.500 INCHES NOMINAL IN
overall_length0.690 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
overall_diameter0.312 INCHES MAXIMUM IN
application_designTRANSMISSION LINE
operating_temp_range-55.0 TO 125.0 CELSIUS DEGC
end_item_identificationPATRIOT
cross-sectional_thickness0.031 INCHES NOMINAL IN
terminal_type_and_quantity2 CONNECTOR
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-318-3608
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 61335 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,NO. +3415-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: PAPER AND GLUE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,NO. +3415-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL WIDTH1.500 INCHES NOMINAL IN
OVERALL LENGTH79.000 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
HOLE DIAMETER0.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALPAPER AND GLUE OVERALL
SPECIAL FEATURESALLOW .250 IN. ON EACH END FOR TRIMMING AT ASSEMBLY IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.125 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
61335Interchangeable
interchangeable cross-reference
interchangeable
TITAN 3 HANDPIECE SYSTEMInterchangeable
interchangeable cross-reference
interchangeable
98-0848Interchangeable
interchangeable cross-reference
interchangeable
TITAN 3Interchangeable
interchangeable cross-reference
interchangeable
11476094-003Interchangeable
interchangeable cross-reference
interchangeable
11476094-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 61335?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 61335?
61335 is a HEAD,DENTAL HANDPIECE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 61335?
There are 10 known substitutes for 61335: 61335, TITAN 3 HANDPIECE SYSTEM, 98-0848 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 61335?
61335 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-318-3608. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 61335

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026