PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 61315H
61315H ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OR IRON OVERALL, thickness: 0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN, hole_diameter: 0.406 INCHES NOMINAL IN, overall_diameter: 0.812 INCHES NOMINAL IN, surface_treatment: CADMIUM OR CHROMATE OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-582-5977, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
61315H
NSN: 5310-00-582-5977
FSC: 5310
CAGE: 31007 — NAVISTAR INTERNATIONAL CORPORATION DBA NAVISTAR (USA)
SPECIFICATIONS
materialSTEEL OR IRON OVERALL
thickness0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
hole_diameter0.406 INCHES NOMINAL IN
overall_diameter0.812 INCHES NOMINAL IN
surface_treatmentCADMIUM OR CHROMATE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-00-582-5977
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 61315H · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE SHAPE STYLE: ROUND
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
SURFACE TREATMENT: CADMIUM OR CHROMATE OVERALL
•
MATERIAL: STEEL OR IRON OVERALL
•
THICKNESS: 0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
•
OVERALL DIAMETER: 0.812 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.406 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
SURFACE TREATMENTCADMIUM OR CHROMATE OVERALL
MATERIALSTEEL OR IRON OVERALL
THICKNESS0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
OVERALL DIAMETER0.812 INCHES NOMINAL IN
HOLE DIAMETER0.406 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
120394Interchangeable
interchangeable cross-reference
interchangeable
1176J92-19Interchangeable
interchangeable cross-reference
interchangeable
9438083Interchangeable
interchangeable cross-reference
interchangeable
904291Interchangeable
interchangeable cross-reference
interchangeable
FF-W-92Interchangeable
interchangeable cross-reference
interchangeable
EE42417Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 61315H?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 61315H?
61315H is a WASHER,FLAT.
What parts can replace 61315H?
There are 24 known substitutes for 61315H: 120394, 1176J92-19, 9438083 and 21 more. Substitute compatibility should be verified for your specific system.
Is 61315H still available?
61315H is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 61315H

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026