PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 612X59-0014-2
612X59-0014-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY X-750 OVERALL, outside_diameter: 0.999 INCHES MINIMUM AND 1.006 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 0.896 INCHES NOMINAL IN, surface_treatment: SILVER OVERALL, cross-sectional_thickness: 0.061 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-309-1556, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
612X59-0014-2
NSN: 5330-01-309-1556
FSC: 5330
CAGE: 15284 — EATON CORPORATION DIV FED (USA)
SPECIFICATIONS
materialNICKEL ALLOY X-750 OVERALL
outside_diameter0.999 INCHES MINIMUM AND 1.006 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter0.896 INCHES NOMINAL IN
surface_treatmentSILVER OVERALL
cross-sectional_thickness0.061 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN
NSN5330-01-309-1556
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 612X59-0014-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL THICKNESS: 0.061 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 0.896 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.999 INCHES MINIMUM AND 1.006 INCHES MAXIMUM IN
•
MATERIAL: NICKEL ALLOY X-750 OVERALL
•
SURFACE TREATMENT: SILVER OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL THICKNESS0.061 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN
APERTURE DIAMETER0.896 INCHES NOMINAL IN
OUTSIDE DIAMETER0.999 INCHES MINIMUM AND 1.006 INCHES MAXIMUM IN
MATERIALNICKEL ALLOY X-750 OVERALL
SURFACE TREATMENTSILVER OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
43223Interchangeable
interchangeable cross-reference
interchangeable
247ASC0573-001Interchangeable
interchangeable cross-reference
interchangeable
4020181-0501Interchangeable
interchangeable cross-reference
interchangeable
0SCRL1Interchangeable
interchangeable cross-reference
interchangeable
50080Interchangeable
interchangeable cross-reference
interchangeable
SM-C-354771Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 612X59-0014-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 612X59-0014-2?
612X59-0014-2 is a GASKET.
What parts can replace 612X59-0014-2?
There are 9 known substitutes for 612X59-0014-2: 43223, 247ASC0573-001, 4020181-0501 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 612X59-0014-2?
612X59-0014-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-309-1556. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 612X59-0014-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026