Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 2.750 INCHES NOMINAL IN, first_leg_length: 4.500 INCHES NOMINAL IN, second_leg_style: CHAMFERED ENDS. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System under NSN 5340-01-260-7262, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
6122991
NSN:5340-01-260-7262 FSC:5340 CAGE:53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
material
ALUMINUM ALLOY 6061
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
SQUARE
first_leg_width
2.750 INCHES NOMINAL IN
first_leg_length
4.500 INCHES NOMINAL IN
second_leg_style
CHAMFERED ENDS
second_leg_width
1.500 INCHES NOMINAL IN
special_features
FIRST LEG T SHAPED W/SHANK 3.750 IN. LG; 1.500 IN. W; COLOR FED STD 595,NUMBER 26270 IN
style_designator
ANGLE
second_leg_length
5.000 INCHES NOMINAL IN
surface_treatment
PLASTIC POLYURETHANE
mounting_hole_type
PLAIN
NSN
5340-01-260-7262
COMPONENT DIAGRAM
KEY FEATURES
•
FIRST LEG LENGTH: 4.500 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC POLYURETHANE
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
FIRST LEG HOLE DIAMETER: 0.219 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
•
FIRST LEG STYLE: SQUARE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE
•
SECOND LEG HOLE DIAMETER: 0.779 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST LEG LENGTH
4.500 INCHES NOMINAL IN
SURFACE TREATMENT
PLASTIC POLYURETHANE
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
FIRST LEG HOLE DIAMETER
0.219 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
FIRST LEG STYLE
SQUARE
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE
SECOND LEG HOLE DIAMETER
0.779 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6122991?
6122991 is a BRACKET,ANGLE.
What parts can replace 6122991?
There are 8 known substitutes for 6122991: 027354-036, 027354-009, 16897 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6122991?
6122991 is cataloged in the Federal Logistics Information System under NSN 5340-01-260-7262. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.