PartsTable
Technical Data Sheet
Download PDF

6122884 — HINGE,ACCESS DOOR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6122884: HINGE,ACCESS DOOR.

The HINGE,ACCESS DOOR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OVERALL, hinge_pin: NOT INCLUDED, body_width: 1.110 INCHES NOMINAL IN, leaf_width: 0.750 INCHES NOMINAL IN, overall_length: 3.630 INCHES NOMINAL IN, special_features: THE KNUCKLE HOLE IS SLOTED-0.380 IN. LONG BY 0.400 IN.

WIDE IN. This part is cataloged in the U.S. Government catalog under NSN 5340-01-380-7972, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6122884
NSN: 5340-01-380-7972
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 304 OVERALL
hinge_pinNOT INCLUDED
body_width1.110 INCHES NOMINAL IN
leaf_width0.750 INCHES NOMINAL IN
overall_length3.630 INCHES NOMINAL IN
knuckle_quantity1
special_featuresTHE KNUCKLE HOLE IS SLOTED-0.380 IN. LONG BY 0.400 IN. WIDE IN
style_designatorPLATE
reversible_featureNOT INCLUDED
hinge_mounting_typeHALF SURFACE
mounting_hole_diameter0.194 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
mounting_hole_quantity2
NSN5340-01-380-7972
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6122884 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
REVERSIBLE FEATURE: NOT INCLUDED
•
KNUCKLE INSIDE DIAMETER: 0.380 INCHES NOMINAL IN
•
BODY WIDTH: 1.110 INCHES NOMINAL IN
•
STYLE DESIGNATOR: PLATE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-766, CLASS 304 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MOUNTING HOLE DIAMETER: 0.194 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY2
REVERSIBLE FEATURENOT INCLUDED
KNUCKLE INSIDE DIAMETER0.380 INCHES NOMINAL IN
BODY WIDTH1.110 INCHES NOMINAL IN
STYLE DESIGNATORPLATE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766, CLASS 304 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MOUNTING HOLE DIAMETER0.194 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
OVERALL LENGTH3.630 INCHES NOMINAL IN
HINGE MOUNTING TYPEHALF SURFACE
HINGE PINNOT INCLUDED
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6122884?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6122884?
6122884 is a HINGE,ACCESS DOOR.
What is the NSN for 6122884?
6122884 is cataloged in the U.S. Government catalog under NSN 5340-01-380-7972. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6122884

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.