PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 611754
611754 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: OIL LUBRICATING LUBRICATION, corner_shape: SQUARE LEFT FLANGE BODY CORNER, flange_width: 0.0600 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM IN, overall_length: 0.4950 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM IN, special_features: OUTSIDE DIAMETER FLAT ONE SIDE 0.0625 IN. DEEP IN, style_designator: SOLID, EXTERNAL FLANGE ONE END.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-293-9928, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
611754
NSN: 3120-00-293-9928
FSC: 3120
CAGE: 06650 — BELL AND HOWELL PHILLIPSBURG CO CORPORATE OFFICES (USA)
SPECIFICATIONS
materialOIL LUBRICATING LUBRICATION
corner_shapeSQUARE LEFT FLANGE BODY CORNER
flange_width0.0600 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM IN
overall_length0.4950 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM IN
special_featuresOUTSIDE DIAMETER FLAT ONE SIDE 0.0625 IN. DEEP IN
style_designatorSOLID, EXTERNAL FLANGE ONE END
body_inside_diameter0.1860 INCHES MINIMUM AND 0.1870 INCHES MAXIMUM IN
body_outside_diameter0.3800 INCHES MINIMUM AND 0.3810 INCHES MAXIMUM IN
flange_outside_diameter0.4975 INCHES MINIMUM AND 0.5025 INCHES MAXIMUM IN
material_document_and_classificationMIL-B-5697,TY 1,COMP A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN3120-00-293-9928
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 611754 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SOLID, EXTERNAL FLANGE ONE END
•
CORNER SHAPE: SQUARE INSIDE LEFT CORNER
•
MATERIAL: OIL LUBRICATING LUBRICATION
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-B-5697,TY 1,COMP A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
MATERIALOIL LUBRICATING LUBRICATION
SPECIAL FEATURESOUTSIDE DIAMETER FLAT ONE SIDE 0.0625 IN. DEEP IN
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
MATERIALCOPPER ALLOY OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-B-5697,TY 1,COMP A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE LEFT FLANGE BODY CORNER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
MB1096P5Interchangeable
interchangeable cross-reference
interchangeable
MB1075-4PC5Interchangeable
interchangeable cross-reference
interchangeable
MB1075-5PC5Interchangeable
interchangeable cross-reference
interchangeable
U1914Interchangeable
interchangeable cross-reference
interchangeable
11754Interchangeable
interchangeable cross-reference
interchangeable
4156Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 611754?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 611754?
611754 is a BEARING,SLEEVE.
What parts can replace 611754?
There are 10 known substitutes for 611754: MB1096P5, MB1075-4PC5, MB1075-5PC5 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 611754?
611754 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-293-9928. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 611754

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026