The Generator,alternating Current, cataloged under National Stock Number 6115-01-712-8675, is classified within Federal Supply Class 6115 (Generators and Generator Sets, Electrical) of the Electric Wire, Power, and Distribution Equipment group. The manufacturer of record is C E Niehoff & Co. Government technical data includes 24 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 6115-01-712-8675 |
| Primary Part Number | K1206 |
| Item Name | Generator,alternating Current |
| FSC / FSG | 6115 / 61 — Generators and Generator Sets, Electrical |
| Manufacturer | C E Niehoff & Co |
| Status | ACTIVE |
| Mounting Facility Type and Quantity | 4 UNTHREADED HOLE(S) |
| Duty Cycle | CONTINUOUS |
| Phase | THREE OUTPUT |
| Shaft Diameter | 0.875 INCHES MINIMUM AND 0.876 INCHES MAXIMUM SECOND END IN |
| Frequency in Hertz | 60.0 OUTPUT |
| Winding Type | PERMANENT MAGNET |
| Mounting Method | FIXED BASE |
| Cooling Method | AMBIENT AIR |
| Thread Direction | RIGHT-HAND SINGLE END |
| Nominal Thread Size | 0.250 INCHES SINGLE END IN |
| Connection Type and Voltage Rating in Volts | 120.0 LINE TO NEUTRAL SINGLE OR 240.0 LINE TO NEUTRAL SINGLE OUTPUT |
| Taper Length | 0.750 INCHES NOMINAL SECOND END IN |
| Taper Length | 2.415 INCHES MINIMUM AND 2.425 INCHES MAXIMUM FIRST END IN |
| Length of Shaft From Housing | 2.425 INCHES SINGLE END IN |
| Accessory Components | BATTERY AND CABLE AND VOLTAGE REGULATOR |
| Enclosure Feature | TOTALLY ENCLOSED |
| Thread Class | 2A SINGLE END A |
| Thread Quantity Per Inch | 20 SINGLE END |
| Power Rating | 3.3 KILOWATTS OUTPUT |
| Terminal Type and Quantity | 1 PIN AND 2 PLUG AND 7 SOLDERLESS LUG |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) SINGLE END |
| Rotor Speed Rating in RPM | 2900.0 SINGLE NO LOAD AND 3600.0 SINGLE FULL LOAD |
| Temp Rating | 150.0 AMBIENT FAHRENHEIT |
| Hole Diameter | 0.323 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IDENTICAL ENDS IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
NSN 6115-01-712-8675 is a Generator,alternating Current, manufactured by C E Niehoff & Co, classified under FSC 6115, Generators and Generator Sets, Electrical. Status: active.
NSN 6115-01-712-8675 has 2 manufacturer part numbers on file: 98-19781 (Department of Defense Project Manager-Mobile Electric Power), K1206 (C E Niehoff & Co).
Key specifications for K1206: Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S); Duty Cycle: CONTINUOUS; Phase: THREE OUTPUT; Shaft Diameter: 0.875 INCHES MINIMUM AND 0.876 INCHES MAXIMUM SECOND END IN. 24 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.