PartsTable TECHNICAL DATA SHEET
NSN 6115-01-471-0764Government record, cited

Generator, Alternating Current6115-01-471-0764

NSN 6115-01-471-0764 · NIIN 014710764
FSC 6115 — Generators and Generator Sets, Electrical · FSG 61 — Electric Wire, Power, and Distribution Equipment
Government record, cited
Also searched as  6115-01-471-0764 · 6115014710764 · NIIN 014710764 · 01-471-0764 · FSC 6115 Generators and Generator Sets, Electrical
Nearby stock numbers  ·
Features
  • Generator,alternating Current — FSC 6115
  • Mounting Facility Type and Quantity: 6 UNTHREADED HOLE(S)
  • Duty Cycle: CONTINUOUS
  • Spline Minor Diameter: 0.470 INCHES NOMINAL SINGLE END IN
  • Phase: THREE OUTPUT
  • Shaft Diameter: 0.598 INCHES MINIMUM AND 0.600 INCHES MAXIMUM SINGLE END IN
  • Frequency in Hertz: 380.0 OR 420.0 OUTPUT
  • Mounting Method: FLANGE
Identification
  • NSN: 6115-01-471-0764
  • NIIN: 014710764
  • FSC: 6115 — Generators and Generator Sets, Electrical
  • FSG: 61 — Electric Wire, Power, and Distribution Equipment
General Description

The Generator,alternating Current, cataloged under National Stock Number 6115-01-471-0764, is classified within Federal Supply Class 6115 (Generators and Generator Sets, Electrical) of the Electric Wire, Power, and Distribution Equipment group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN6115-01-471-0764
Item NameGenerator,alternating Current
FSC / FSG6115 / 61 — Generators and Generator Sets, Electrical
StatusACTIVE
Mounting Facility Type and Quantity6 UNTHREADED HOLE(S)
Duty CycleCONTINUOUS
Spline Minor Diameter0.470 INCHES NOMINAL SINGLE END IN
PhaseTHREE OUTPUT
Shaft Diameter0.598 INCHES MINIMUM AND 0.600 INCHES MAXIMUM SINGLE END IN
Frequency in Hertz380.0 OR 420.0 OUTPUT
Mounting MethodFLANGE
Cooling MethodNATURAL CONVECTION VENTILATED AND SEPARATELY VENTILATED
Shaft Rotation DirectionCOUNTERCLOCKWISE SINGLE END
Maximum Operating Altitude Rating15000.0 FEET FT
Spline Quantity6 SINGLE END
Connection Type and Voltage Rating in Volts110.0 LINE TO LINE LOW OUTPUT
Nominal Center to Center Distance Between Mounting Facilities Parallel to Width5.000 INCHES IN
Length of Shaft From Housing0.520 INCHES SINGLE END IN
Enclosure FeatureOPEN PROTECTED
Power Rating30.0 KILOVOLT-AMPERE OUTPUT
Shaft End CharacteristicA14 SINGLE STYLE SINGLE END
Terminal Type and Quantity4 THREADED STUD
Rotor Speed Rating in RPM11100.0 LOW FULL LOAD AND 12600.0 HIGH FULL LOAD OR 15200.0 HIGH NO LOAD
Temp Rating-40.0 OPERATING CELSIUS AND 71.0 OPERATING CELSIUS
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
K884087-401 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 6115 — Generators and Generator Sets, Electrical
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
6115-00-000-0100
GENERATOR,ALTERNATING CURRENT
6115-00-001-4612
LEVER ASSY
6115-00-001-8553
6115-00-001-8553 · Item name not on file
6115-00-001-8853
6115-00-001-8853 · Item name not on file
6115-00-004-1782
GENERATOR,ALTERNATING CURRENT
6115-00-004-2766
6115-00-004-2766 · Item name not on file
6115-00-004-3786
6115-00-004-3786 · Item name not on file
6115-00-004-3787
6115-00-004-3787 · Item name not on file

Frequently Asked Questions

What is NSN 6115-01-471-0764?

NSN 6115-01-471-0764 is a Generator,alternating Current, classified under FSC 6115, Generators and Generator Sets, Electrical. Status: active.

What are the specifications of 6115-01-471-0764?

Key specifications for 6115-01-471-0764: Mounting Facility Type and Quantity: 6 UNTHREADED HOLE(S); Duty Cycle: CONTINUOUS; Spline Minor Diameter: 0.470 INCHES NOMINAL SINGLE END IN; Phase: THREE OUTPUT. 20 specifications are documented in the U.S. Government catalog.

Is NSN 6115-01-471-0764 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com