The Generator,alternating Current, cataloged under National Stock Number 6115-01-303-4262, is classified within Federal Supply Class 6115 (Generators and Generator Sets, Electrical) of the Electric Wire, Power, and Distribution Equipment group. The manufacturer of record is Kato Engineering Inc.. Government technical data includes 12 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 6115-01-303-4262 |
| Primary Part Number | A212900001 |
| Item Name | Generator,alternating Current |
| FSC / FSG | 6115 / 61 — Generators and Generator Sets, Electrical |
| Manufacturer | Kato Engineering Inc. |
| Status | ACTIVE |
| Mounting Facility Type and Quantity | 4 UNTHREADED HOLE(S) |
| Phase | THREE OUTPUT |
| Frequency in Hertz | 60.0 OUTPUT |
| Shaft Center to Mounting Surface Distance | 16.875 INCHES SINGLE END IN |
| Winding Type | PERMANENT MAGNET |
| Mounting Method | FIXED BASE |
| Connection Type and Voltage Rating in Volts | 450.0 LINE TO NEUTRAL SINGLE OUTPUT |
| Nominal Center to Center Distance Between Mounting Facilities Parallel to Length | 3.000 INCHES IN |
| Nominal Center to Center Distance Between Mounting Facilities Parallel to Width | 25.000 INCHES IN |
| Current Rating in Amps | 481.000 SINGLE OUTPUT |
| Power Rating | 300.0 KILOWATTS OUTPUT |
| Temp Rating | 50.0 AMBIENT CELSIUS |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| A212900001 PRIMARY | Kato Engineering Inc. (USA) |
NSN 6115-01-303-4262 is a Generator,alternating Current, manufactured by Kato Engineering Inc., classified under FSC 6115, Generators and Generator Sets, Electrical. Status: active.
NSN 6115-01-303-4262 has 1 manufacturer part number on file: A212900001 (Kato Engineering Inc.).
Key specifications for A212900001: Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S); Phase: THREE OUTPUT; Frequency in Hertz: 60.0 OUTPUT; Shaft Center to Mounting Surface Distance: 16.875 INCHES SINGLE END IN. 12 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.