PartsTable TECHNICAL DATA SHEET
NSN 6115-00-248-0398Government record, cited

Generator, Direct Current6115-00-248-0398

NSN 6115-00-248-0398 · NIIN 002480398
FSC 6115 — Generators and Generator Sets, Electrical · FSG 61 — Electric Wire, Power, and Distribution Equipment
Government record, cited
Also searched as  6115-00-248-0398 · 6115002480398 · NIIN 002480398 · 00-248-0398 · FSC 6115 Generators and Generator Sets, Electrical
Nearby stock numbers  ·
Features
  • Generator,direct Current — FSC 6115
  • Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S)
  • Duty Cycle: CONTINUOUS
  • Shaft Diameter: 0.500 INCHES NOMINAL SINGLE END IN
  • Shaft Center to Mounting Surface Distance: 3.500 INCHES SINGLE END IN
  • Winding Type: COMPOUND WOUND
  • Mounting Method: FIXED BASE
  • Shaft Rotation Direction: CLOCKWISE SINGLE END
Identification
  • NSN: 6115-00-248-0398
  • NIIN: 002480398
  • FSC: 6115 — Generators and Generator Sets, Electrical
  • FSG: 61 — Electric Wire, Power, and Distribution Equipment
General Description

The Generator,direct Current, cataloged under National Stock Number 6115-00-248-0398, is classified within Federal Supply Class 6115 (Generators and Generator Sets, Electrical) of the Electric Wire, Power, and Distribution Equipment group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 4 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN6115-00-248-0398
Item NameGenerator,direct Current
FSC / FSG6115 / 61 — Generators and Generator Sets, Electrical
StatusACTIVE
Mounting Facility Type and Quantity4 UNTHREADED HOLE(S)
Duty CycleCONTINUOUS
Shaft Diameter0.500 INCHES NOMINAL SINGLE END IN
Shaft Center to Mounting Surface Distance3.500 INCHES SINGLE END IN
Winding TypeCOMPOUND WOUND
Mounting MethodFIXED BASE
Shaft Rotation DirectionCLOCKWISE SINGLE END
Connection Type and Voltage Rating in Volts240.0 LINE TO NEUTRAL SINGLE OUTPUT
Nominal Center to Center Distance Between Mounting Facilities Parallel to Length5.500 INCHES IN
Nominal Center to Center Distance Between Mounting Facilities Parallel to Width3.000 INCHES IN
Length of Shaft From Housing1.563 INCHES SINGLE END IN
Current Rating in Amps0.100 SINGLE OUTPUT
Enclosure FeatureDUSTPROOF
Shaft End CharacteristicA5 SINGLE STYLE SINGLE END
Excitor TypeSELF-EXCITED
Rotor Speed Rating in RPM3450.0 SINGLE FULL LOAD
Temp Rating40.0 AMBIENT CELSIUS
Inclosure SpecificationCOMMERCIAL
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 4
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
6210-00-436-5243G102 POSSIBLE MATCH
LIGHT,PANEL
Possible match (shared part number)L3 Technologies, Inc.
5310-00-814-2583K616219-11 POSSIBLE MATCH
WASHER,FLAT
Possible match (shared part number)Kaman Aerospace Corporation Dba Air Vehicles & Mro Division
6520-01-272-4548 POSSIBLE MATCH
SLEEVE,ASPIRATOR,DENTAL
Possible match (shared part number)
7025-01-725-6984G102 POSSIBLE MATCH
MOUSE,DATA ENTRY
Possible match (shared part number)Logitech Inc.
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
G102 3/9 Design control — primary reference
Fractional Motors Co
Related Parts
6210-00-436-5243POSSIBLE MATCH
LIGHT,PANEL
G102
5310-00-814-2583POSSIBLE MATCH
WASHER,FLAT
K616219-11
6520-01-272-4548POSSIBLE MATCH
SLEEVE,ASPIRATOR,DENTAL
7025-01-725-6984POSSIBLE MATCH
MOUSE,DATA ENTRY
G102

Frequently Asked Questions

What is NSN 6115-00-248-0398?

NSN 6115-00-248-0398 is a Generator,direct Current, classified under FSC 6115, Generators and Generator Sets, Electrical. Status: active.

What NSN replaces 6115-00-248-0398?

4 possible matches (shared part number, not a government interchangeability claim): 6210-00-436-5243, 5310-00-814-2583, 6520-01-272-4548. Verify interchangeability with system specifications before substitution.

What are the specifications of 6115-00-248-0398?

Key specifications for 6115-00-248-0398: Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S); Duty Cycle: CONTINUOUS; Shaft Diameter: 0.500 INCHES NOMINAL SINGLE END IN; Shaft Center to Mounting Surface Distance: 3.500 INCHES SINGLE END IN. 18 specifications are documented in the U.S. Government catalog.

Is NSN 6115-00-248-0398 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com