PartsTable
Technical Data Sheet
Download PDF

6114-010 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6114-010: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYHEXAMETHYLENE ADIPAMIDE, center_hole_diameter: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN, end_item_identification: HEMTT FAMILY (HEAVY EXPANDED MOBILITY TACTICAL TRUCKS). This part is cataloged in the U.S.

Government catalog under NSN 5331-01-231-0702, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6114-010
NSN: 5331-01-231-0702
FSC: 5331 — O-ring
CAGE: 58114 — REXROTH CORP THE MOBILE HYDRAULICS DIV (USA)
SPECIFICATIONS
materialPLASTIC POLYHEXAMETHYLENE ADIPAMIDE
center_hole_diameter0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
end_item_identificationHEMTT FAMILY (HEAVY EXPANDED MOBILITY TACTICAL TRUCKS)
NSN5331-01-231-0702
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6114-010 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYHEXAMETHYLENE ADIPAMIDE
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONHEMTT FAMILY (HEAVY EXPANDED MOBILITY TACTICAL TRUCKS)
MATERIALPLASTIC POLYHEXAMETHYLENE ADIPAMIDE
SUBSTITUTES & CROSS-REFERENCES 3
1PS83Reference document
Same NSN cross-reference
Reference document — Secondary reference
1PS12Reference document
Same NSN cross-reference
Reference document — Secondary reference
1P583Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6114-010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6114-010?
6114-010 is a O-RING.
What parts can replace 6114-010?
There are 3 known substitutes for 6114-010: 1PS83, 1PS12, 1P583. Substitute compatibility should be verified for your specific system.
What is the NSN for 6114-010?
6114-010 is cataloged in the U.S. Government catalog under NSN 5331-01-231-0702. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6114-010