PartsTable
Technical Data Sheet
Download PDF

611156 — CONNECTOR,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

611156: CONNECTOR,ROD END.

The CONNECTOR,ROD END is a the manufacturer industrial component. Key specifications include radius: 0.309 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN, material: STEEL OVERALL, thread_class: 3B ROD CONNECTION, overall_width: 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN, thread_length: 1.172 INCHES MINIMUM AND 1.204 INCHES MAXIMUM ROD CONNECTION IN, overall_height: 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-209-7200, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
611156
NSN: 5340-00-209-7200
FSC: 5340 — Hardware, Commercial
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
radius0.309 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN
materialSTEEL OVERALL
thread_class3B ROD CONNECTION
overall_width0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
thread_length1.172 INCHES MINIMUM AND 1.204 INCHES MAXIMUM ROD CONNECTION IN
overall_height0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
special_features0.125 IN. RADIUS BETWEEN SHANK AND ROD CONNECTION END IN
style_designatorCONNECTOR
thread_directionRIGHT-HAND ROD CONNECTION
nominal_thread_size0.312 INCHES ROD CONNECTION IN
shank_overall_length3.922 INCHES MINIMUM AND 3.954 INCHES MAXIMUM IN
shank_outside_diameter0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
NSN5340-00-209-7200
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 611156 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RADIUS: 0.309 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN
•
THREAD LENGTH: 1.172 INCHES MINIMUM AND 1.204 INCHES MAXIMUM ROD CONNECTION IN
•
STYLE DESIGNATOR: CONNECTOR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-890,CLASS B OR BS MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND ROD CONNECTION
•
NOMINAL THREAD SIZE: 0.312 INCHES ROD CONNECTION IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
RADIUS0.309 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN
THREAD LENGTH1.172 INCHES MINIMUM AND 1.204 INCHES MAXIMUM ROD CONNECTION IN
STYLE DESIGNATORCONNECTOR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-890,CLASS B OR BS MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
NOMINAL THREAD SIZE0.312 INCHES ROD CONNECTION IN
SHANK OUTSIDE DIAMETER0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
SPECIAL FEATURES0.125 IN. RADIUS BETWEEN SHANK AND ROD CONNECTION END IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 611156?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 611156?
611156 is a CONNECTOR,ROD END.
What is the NSN for 611156?
611156 is cataloged in the U.S. Government catalog under NSN 5340-00-209-7200. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 611156

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.