PartsTable
Technical Data Sheet
Download PDF

6105364 — CLAMP,SYNCHRO

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6105364: CLAMP,SYNCHRO.

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include length: 1.550 INCHES MINIMUM AND 1.610 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 6061, base_width: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, hole_diameter: 0.186 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN, effective_height: 1.030 INCHES MINIMUM AND 1.090 INCHES MAXIMUM IN, special_features: ORIGINAL DRAWING NAME-CLAMP, RELAY; ITEM MAY REQUIRE RUBBER PAD, CHLOROPRENE SHEET IAW AMS 3240 AND ADHESIVE, MMM-A-121. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-485-7695, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6105364
NSN: 5340-01-485-7695
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
length1.550 INCHES MINIMUM AND 1.610 INCHES MAXIMUM IN
materialALUMINUM ALLOY 6061
base_width0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
hole_diameter0.186 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
effective_height1.030 INCHES MINIMUM AND 1.090 INCHES MAXIMUM IN
special_featuresORIGINAL DRAWING NAME-CLAMP, RELAY; ITEM MAY REQUIRE RUBBER PAD, CHLOROPRENE SHEET IAW AMS 3240 AND ADHESIVE, MMM-A-121
style_designatorMOUNTING
surface_treatmentANODIZE
material_thickness0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
material_document_and_classificationQQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE
surface_treatment_document_and_classificationMIL-8625, TYPE II, CLASS 2 MIL STD SINGLE TREATMENT RESPONSE
NSN5340-01-485-7695
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6105364 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.550 INCHES MINIMUM AND 1.610 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-8625, TYPE II, CLASS 2 MIL STD SINGLE TREATMENT RESPONSE
•
STYLE DESIGNATOR: MOUNTING
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL THICKNESS: 0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
•
BASE WIDTH: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
•
EFFECTIVE HEIGHT: 1.030 INCHES MINIMUM AND 1.090 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LENGTH1.550 INCHES MINIMUM AND 1.610 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-8625, TYPE II, CLASS 2 MIL STD SINGLE TREATMENT RESPONSE
STYLE DESIGNATORMOUNTING
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL THICKNESS0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
BASE WIDTH0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
EFFECTIVE HEIGHT1.030 INCHES MINIMUM AND 1.090 INCHES MAXIMUM IN
SPECIAL FEATURESORIGINAL DRAWING NAME-CLAMP, RELAY; ITEM MAY REQUIRE RUBBER PAD, CHLOROPRENE SHEET IAW AMS 3240 AND ADHESIVE, MMM-A-121
SURFACE TREATMENTANODIZE
MATERIALALUMINUM ALLOY 6061
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6105364?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6105364?
6105364 is a CLAMP,SYNCHRO.
What is the NSN for 6105364?
6105364 is cataloged in the U.S. Government catalog under NSN 5340-01-485-7695. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6105364

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.