The Motor,alternating Current, cataloged under National Stock Number 6105-01-684-1896, is classified within Federal Supply Class 6105 (Motors, Electrical) of the Electric Wire, Power, and Distribution Equipment group. The manufacturer of record is Baldor Electric Co. Government technical data includes 12 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 6105-01-684-1896 |
| Primary Part Number | 05H021X129G1 |
| Item Name | Motor,alternating Current |
| FSC / FSG | 6105 / 61 — Motors, Electrical |
| Manufacturer | Baldor Electric Co |
| Status | ACTIVE |
| Mounting Facility Type and Quantity | 4 UNTHREADED HOLE(S) |
| Duty Cycle | CONTINUOUS |
| Phase | THREE INPUT |
| Shaft Diameter | 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM SINGLE END IN |
| Frequency in Hertz | 60.0 OUTPUT |
| Mounting Method | FIXED BASE |
| Shaft Rotation Direction | COUNTERCLOCKWISE OR CLOCKWISE SINGLE END |
| Nominal Center to Center Distance Between Mounting Facilities Parallel to Length | 5.0 INCHES IN |
| Nominal Center to Center Distance Between Mounting Facilities Parallel to Width | 5.5 INCHES IN |
| Length of Shaft From Housing | 1.99 INCHES SINGLE END IN |
| Enclosure Feature | TOTALLY ENCLOSED |
| Rotor Speed Rating in RPM | 1745.0 SINGLE FULL LOAD |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Unit of Issue | EA |
| Part Number | Manufacturer |
|---|---|
| 05H021X129G1 PRIMARY | Baldor Electric Co (USA) |
NSN 6105-01-684-1896 is a Motor,alternating Current, manufactured by Baldor Electric Co, classified under FSC 6105, Motors, Electrical. Status: active.
NSN 6105-01-684-1896 has 1 manufacturer part number on file: 05H021X129G1 (Baldor Electric Co).
Key specifications for 05H021X129G1: Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S); Duty Cycle: CONTINUOUS; Phase: THREE INPUT; Shaft Diameter: 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM SINGLE END IN. 12 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.