The Motor,alternating Current, cataloged under National Stock Number 6105-01-362-9370, is classified within Federal Supply Class 6105 (Motors, Electrical) of the Electric Wire, Power, and Distribution Equipment group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 6105-01-362-9370 |
| Item Name | Motor,alternating Current |
| FSC / FSG | 6105 / 61 — Motors, Electrical |
| Status | ACTIVE |
| Mounting Facility Type and Quantity | 4 THREADED HOLE(S) |
| Phase | THREE INPUT |
| Frequency in Hertz | 60.0 INPUT |
| Shaft Center to Mounting Surface Distance | 7.000 INCHES SINGLE END IN |
| Mounting Method | FIXED BASE |
| Frame Size Designation | 286U |
| Features Provided | HORIZONTAL MOUNTING POSITION |
| Connection Type and Voltage Rating in Volts | 440.0 LINE TO NEUTRAL SINGLE INPUT |
| Nominal Center to Center Distance Between Mounting Facilities Parallel to Length | 11.000 INCHES IN |
| Nominal Center to Center Distance Between Mounting Facilities Parallel to Width | 11.000 INCHES IN |
| Current Rating in Amps | 33.400 SINGLE INPUT |
| Power Rating | 25.000 HORSEPOWER OUTPUT |
| Rotor Speed Rating in RPM | 1800.0 SINGLE FULL LOAD |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Unit of Issue | EA |
| Reference | Meaning |
|---|---|
| 0250C-10AN-0014 | 5/9 Secondary reference U.S. Government activity |
| 875780A-1 | 3/9 Design control — primary reference U.S. Government activity |
NSN 6105-01-362-9370 is a Motor,alternating Current, classified under FSC 6105, Motors, Electrical. Status: active.
Key specifications for 6105-01-362-9370: Mounting Facility Type and Quantity: 4 THREADED HOLE(S); Phase: THREE INPUT; Frequency in Hertz: 60.0 INPUT; Shaft Center to Mounting Surface Distance: 7.000 INCHES SINGLE END IN. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.