The Motor,direct Current, cataloged under National Stock Number 6105-01-351-3177, is classified within Federal Supply Class 6105 (Motors, Electrical) of the Electric Wire, Power, and Distribution Equipment group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 6105-01-351-3177 |
| Item Name | Motor,direct Current |
| FSC / FSG | 6105 / 61 — Motors, Electrical |
| Status | ACTIVE |
| Mounting Facility Type and Quantity | 4 SLOT |
| Duty Cycle | CONTINUOUS |
| Shaft Diameter | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM SINGLE END IN |
| Shaft Center to Mounting Surface Distance | 3.485 INCHES SINGLE END IN |
| Mounting Method | FIXED BASE |
| Features Provided | HORIZONTAL MOUNTING POSITION |
| Connection Type and Voltage Rating in Volts | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| Nominal Center to Center Distance Between Mounting Facilities Parallel to Length | 4.900 INCHES IN |
| Nominal Center to Center Distance Between Mounting Facilities Parallel to Width | 3.000 INCHES IN |
| Power Rating | 0.500 HORSEPOWER OUTPUT |
| Shaft End Characteristic | A9 SINGLE STYLE SINGLE END |
| Rotor Speed Rating in RPM | 1725.0 SINGLE FULL LOAD |
| Temp Rating | 40.0 AMBIENT CELSIUS |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Unit of Issue | EA |
| Reference | Meaning |
|---|---|
| 5BCJ56ED7D | 3/9 Design control — primary reference General Electric Co Outdoor Breaker Business Section |
NSN 6105-01-351-3177 is a Motor,direct Current, classified under FSC 6105, Motors, Electrical. Status: active.
Key specifications for 6105-01-351-3177: Mounting Facility Type and Quantity: 4 SLOT; Duty Cycle: CONTINUOUS; Shaft Diameter: 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM SINGLE END IN; Shaft Center to Mounting Surface Distance: 3.485 INCHES SINGLE END IN. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.