The Motor,alternating Current, cataloged under National Stock Number 6105-01-222-2156, is classified within Federal Supply Class 6105 (Motors, Electrical) of the Electric Wire, Power, and Distribution Equipment group. The manufacturer of record is Abb Motors & Mechanical Inc Div Abb Motors and Mechanical Inc.. Government technical data includes 5 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 6105-01-222-2156 |
| Primary Part Number | 7-712-7526 |
| Item Name | Motor,alternating Current |
| FSC / FSG | 6105 / 61 — Motors, Electrical |
| Manufacturer | Abb Motors & Mechanical Inc Div Abb Motors and Mechanical Inc. |
| Status | ACTIVE |
| Mounting Facility Type and Quantity | 4 THREADED HOLE(S) |
| Shaft Diameter | 1.1245 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM SINGLE END IN |
| Mounting Method | FACE |
| Frame Size Designation | 213C-215C |
| Inclosure Specification | NEMA |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Unit of Issue | EA |
| Part Number | Manufacturer |
|---|---|
| 7-712-7526 PRIMARY | Abb Motors & Mechanical Inc Div Abb Motors and Mechanical Inc. (USA) |
| Reference | Meaning |
|---|---|
| 7-712-7526 | 3/9 Design control — primary reference Baldor Electric Co |
NSN 6105-01-222-2156 is a Motor,alternating Current, manufactured by Abb Motors & Mechanical Inc Div Abb Motors and Mechanical Inc., classified under FSC 6105, Motors, Electrical. Status: active.
NSN 6105-01-222-2156 has 1 manufacturer part number on file: 7-712-7526 (Abb Motors & Mechanical Inc Div Abb Motors and Mechanical Inc.).
Key specifications for 7-712-7526: Mounting Facility Type and Quantity: 4 THREADED HOLE(S); Shaft Diameter: 1.1245 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM SINGLE END IN; Overall Length: 15.875 INCHES IN; Mounting Method: FACE. 5 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.