PartsTable TECHNICAL DATA SHEET
NSN 6105-01-196-6377Government record, cited

Motor, Alternating Current6105-01-196-6377

NSN 6105-01-196-6377 · NIIN 011966377
FSC 6105 — Motors, Electrical · FSG 61 — Electric Wire, Power, and Distribution Equipment
Government record, cited
Also searched as  6105-01-196-6377 · 6105011966377 · NIIN 011966377 · 01-196-6377 · FSC 6105 Motors, Electrical
Nearby stock numbers  ·
Features
  • Motor,alternating Current — FSC 6105
  • Keyway Depth: 0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE END IN
  • Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S)
  • Duty Cycle: INTERMITTENT
  • Phase: THREE INPUT
  • Shaft Diameter: 2.124 INCHES MINIMUM AND 2.125 INCHES MAXIMUM SINGLE END IN
  • Frequency in Hertz: 60.0 INPUT
  • Shaft Center to Mounting Surface Distance: 9.970 INCHES SINGLE END IN
Identification
  • NSN: 6105-01-196-6377
  • NIIN: 011966377
  • FSC: 6105 — Motors, Electrical
  • FSG: 61 — Electric Wire, Power, and Distribution Equipment
General Description

The Motor,alternating Current, cataloged under National Stock Number 6105-01-196-6377, is classified within Federal Supply Class 6105 (Motors, Electrical) of the Electric Wire, Power, and Distribution Equipment group. Government technical data includes 27 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.

Technical Specifications
ParameterValue
NSN6105-01-196-6377
Item NameMotor,alternating Current
FSC / FSG6105 / 61 — Motors, Electrical
StatusACTIVE
Keyway Depth0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE END IN
Mounting Facility Type and Quantity4 UNTHREADED HOLE(S)
Duty CycleINTERMITTENT
PhaseTHREE INPUT
Shaft Diameter2.124 INCHES MINIMUM AND 2.125 INCHES MAXIMUM SINGLE END IN
Frequency in Hertz60.0 INPUT
Shaft Center to Mounting Surface Distance9.970 INCHES SINGLE END IN
Shaft End StyleFLAT KEYWAY SINGLE END
Winding TypeINDUCTION-SQUIRREL CAGE
Mounting MethodFIXED BASE
Frame Size Designation405TNS
Cooling MethodNONVENTILATED
Time Interval15.0 MINUTES MAXIMUM ON
Features ProvidedHORIZONTAL MOUNTING POSITION
Connection Type and Voltage Rating in Volts440.0 LINE TO NEUTRAL SINGLE INPUT
Keyway Length3.1200 INCHES NOMINAL SINGLE END IN
Nominal Center to Center Distance Between Mounting Facilities Parallel to Length13.740 INCHES IN
Torque Rating and Type150.0 FOOT-POUNDS RUNNING FT
Keyway Width0.500 INCHES MINIMUM AND 0.502 INCHES MAXIMUM SINGLE END IN
Nominal Center to Center Distance Between Mounting Facilities Parallel to Width16.000 INCHES IN
Length of Shaft From Housing4.380 INCHES SINGLE END IN
Current Rating in Amps58.000 LOW OR 80.000 HIGH INPUT
Enclosure FeatureWATERTIGHT
Current Rating MethodLOAD
Power Rating16.700 HORSEPOWER OUTPUT
Terminal Type and Quantity6 SOLDERLESS LUG
Rotor Speed Rating in RPM600.0 LOW NO LOAD AND 1800.0 HIGH NO LOAD
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Unit of IssueEA
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
15A00126-0000 3/9 Design control — primary reference
Louis Allis Co the This Company Has Gone Bankrupt and Has Been Purchased by 3 Companies
No interchangeability data on file.
Other items in FSC 6105 — Motors, Electrical
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
6105-00-001-1471
6105-00-001-1471 · Item name not on file
6105-00-001-1473
6105-00-001-1473 · Item name not on file
6105-00-001-1497
6105-00-001-1497 · Item name not on file
6105-00-001-1710
6105-00-001-1710 · Item name not on file
6105-00-001-1712
MOTOR,ALTERNATING CURRENT
6105-00-001-2097
6105-00-001-2097 · Item name not on file
6105-00-001-2098
6105-00-001-2098 · Item name not on file
6105-00-001-3680
MOTOR,DIRECT CURRENT

Frequently Asked Questions

What is NSN 6105-01-196-6377?

NSN 6105-01-196-6377 is a Motor,alternating Current, classified under FSC 6105, Motors, Electrical. Status: active.

What are the specifications of 6105-01-196-6377?

Key specifications for 6105-01-196-6377: Keyway Depth: 0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE END IN; Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S); Duty Cycle: INTERMITTENT; Phase: THREE INPUT. 27 specifications are documented in the U.S. Government catalog.

Is NSN 6105-01-196-6377 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com