PartsTable TECHNICAL DATA SHEET
NSN 6105-01-181-4506Government record, cited

Motor, Alternating Current6105-01-181-4506

NSN 6105-01-181-4506 · NIIN 011814506 · Part number M400095
Mgr Equipment Corp · FSC 6105 — Motors, Electrical · FSG 61 — Electric Wire, Power, and Distribution Equipment · CAGE 11718
Government record, cited
NSN 6105-01-181-4506 — this item is cataloged by the U.S. Government under National Stock Number 6105-01-181-4506. Manufacturer of record part number: M400095.
Also searched as  6105-01-181-4506 · 6105011814506 · NIIN 011814506 · 01-181-4506 · FSC 6105 Motors, Electrical · CAGE 11718 · M400095 · R50586
Nearby stock numbers  ·
Features
  • Motor,alternating Current — FSC 6105
  • Duty Cycle: CONTINUOUS
  • Phase: SINGLE INPUT
  • Shaft Diameter: 0.500 INCHES NOMINAL SINGLE END IN
  • Frequency in Hertz: 60.0 INPUT
  • Shaft Center to Mounting Surface Distance: 3.000 INCHES SINGLE END IN
  • Mounting Method: FIXED BASE
  • Frame Size Designation: 48
Identification
  • NSN: 6105-01-181-4506
  • NIIN: 011814506
  • FSC: 6105 — Motors, Electrical
  • FSG: 61 — Electric Wire, Power, and Distribution Equipment
  • Primary part number: M400095
  • Manufacturer: Mgr Equipment Corp
General Description

The Motor,alternating Current, cataloged under National Stock Number 6105-01-181-4506, is classified within Federal Supply Class 6105 (Motors, Electrical) of the Electric Wire, Power, and Distribution Equipment group. The manufacturer of record is Mgr Equipment Corp. Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.

Technical Specifications
ParameterValue
NSN6105-01-181-4506
Primary Part NumberM400095
Item NameMotor,alternating Current
FSC / FSG6105 / 61 — Motors, Electrical
ManufacturerMgr Equipment Corp
StatusACTIVE
Duty CycleCONTINUOUS
PhaseSINGLE INPUT
Shaft Diameter0.500 INCHES NOMINAL SINGLE END IN
Frequency in Hertz60.0 INPUT
Shaft Center to Mounting Surface Distance3.000 INCHES SINGLE END IN
Mounting MethodFIXED BASE
Frame Size Designation48
Connection Type and Voltage Rating in Volts208.0 LINE TO NEUTRAL SINGLE INPUT
Length of Shaft From Housing1.562 INCHES SINGLE END IN
Current Rating in Amps4.400 SINGLE INPUT
Enclosure FeatureDRIPPROOF PROTECTED-15 DEG
Current Rating MethodLOAD
Power Rating0.500 HORSEPOWER OUTPUT
Rotor Speed Rating in RPM3600.0 SINGLE NO LOAD AND 3450.0 SINGLE FULL LOAD
Temp Rating50.0 AMBIENT CELSIUS
Inclosure SpecificationNEMA
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Unit of IssueEA
Cross-Reference Index
Part NumberManufacturer
M400095 PRIMARY Mgr Equipment Corp (USA)
Reference documents
ReferenceMeaning
R50586 5/9 Secondary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 6105 — Motors, Electrical
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
6105-00-001-1471
6105-00-001-1471 · Item name not on file
6105-00-001-1473
6105-00-001-1473 · Item name not on file
6105-00-001-1497
6105-00-001-1497 · Item name not on file
6105-00-001-1710
6105-00-001-1710 · Item name not on file
6105-00-001-1712
MOTOR,ALTERNATING CURRENT
6105-00-001-2097
6105-00-001-2097 · Item name not on file
6105-00-001-2098
6105-00-001-2098 · Item name not on file
6105-00-001-3680
MOTOR,DIRECT CURRENT

Frequently Asked Questions

What is NSN 6105-01-181-4506?

NSN 6105-01-181-4506 is a Motor,alternating Current, manufactured by Mgr Equipment Corp, classified under FSC 6105, Motors, Electrical. Status: active.

What part numbers are listed for NSN 6105-01-181-4506?

NSN 6105-01-181-4506 has 1 manufacturer part number on file: M400095 (Mgr Equipment Corp).

What are the specifications of M400095?

Key specifications for M400095: Duty Cycle: CONTINUOUS; Phase: SINGLE INPUT; Shaft Diameter: 0.500 INCHES NOMINAL SINGLE END IN; Frequency in Hertz: 60.0 INPUT. 16 specifications are documented in the U.S. Government catalog.

Is NSN 6105-01-181-4506 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com