PartsTable TECHNICAL DATA SHEET
NSN 6105-01-160-7719Government record, cited

Motor, Alternating Current6105-01-160-7719

NSN 6105-01-160-7719 · NIIN 011607719 · Part number T21A
Mpc Products Corporation Dba Woodward Mpc, Inc. · FSC 6105 — Motors, Electrical · FSG 61 — Electric Wire, Power, and Distribution Equipment · CAGE 19710
Government record, cited
NSN 6105-01-160-7719 — this item is cataloged by the U.S. Government under National Stock Number 6105-01-160-7719. Manufacturer of record part number: T21A.
Also searched as  6105-01-160-7719 · 6105011607719 · NIIN 011607719 · 01-160-7719 · FSC 6105 Motors, Electrical · CAGE 19710 · T21A · 77C719690
Nearby stock numbers  ·
Features
  • Motor,alternating Current — FSC 6105
  • Keyway Depth: 0.057 INCHES NOMINAL SINGLE END IN
  • Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S)
  • Duty Cycle: INTERMITTENT
  • Phase: THREE INPUT
  • Shaft Diameter: 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM SINGLE END IN
  • Frequency in Hertz: 400.0 INPUT
  • Winding Type: INDUCTION-SQUIRREL CAGE
Identification
  • NSN: 6105-01-160-7719
  • NIIN: 011607719
  • FSC: 6105 — Motors, Electrical
  • FSG: 61 — Electric Wire, Power, and Distribution Equipment
  • Primary part number: T21A
  • Manufacturer: Mpc Products Corporation Dba Woodward Mpc, Inc.
General Description

The Motor,alternating Current, cataloged under National Stock Number 6105-01-160-7719, is classified within Federal Supply Class 6105 (Motors, Electrical) of the Electric Wire, Power, and Distribution Equipment group. The manufacturer of record is Mpc Products Corporation Dba Woodward Mpc, Inc.. Government technical data includes 27 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active. Unit of issue: EA.

Technical Specifications
ParameterValue
NSN6105-01-160-7719
Primary Part NumberT21A
Item NameMotor,alternating Current
FSC / FSG6105 / 61 — Motors, Electrical
ManufacturerMpc Products Corporation Dba Woodward Mpc, Inc.
StatusACTIVE
Keyway Depth0.057 INCHES NOMINAL SINGLE END IN
Mounting Facility Type and Quantity4 UNTHREADED HOLE(S)
Duty CycleINTERMITTENT
PhaseTHREE INPUT
Shaft Diameter0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM SINGLE END IN
Frequency in Hertz400.0 INPUT
Winding TypeINDUCTION-SQUIRREL CAGE
Nominal Center to Center Distance Between Mounting Facilities Parallel to Height1.876 INCHES IN
Mounting MethodPAD
Cooling MethodNONVENTILATED
Time Interval1.0 MINUTES MAXIMUM ON AND 5.0 MINUTES MINIMUM OFF
Shaft Rotation DirectionCOUNTERCLOCKWISE SINGLE END
Features ProvidedHORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION
Maximum Operating Altitude Rating10000.0 FEET FT
Connection Type and Voltage Rating in Volts208.0 LINE TO NEUTRAL SINGLE INPUT
Keyway Length0.5000 INCHES NOMINAL SINGLE END IN
Torque Rating and Type40.0 INCH-POUNDS RUNNING IN
Keyway Width0.094 INCHES MINIMUM AND 0.095 INCHES MAXIMUM SINGLE END IN
Nominal Center to Center Distance Between Mounting Facilities Parallel to Width1.876 INCHES IN
Length of Shaft From Housing0.755 INCHES SINGLE END IN
Current Rating in Amps2.200 SINGLE INPUT
Enclosure FeatureTOTALLY ENCLOSED
Current Rating MethodLOCKED ROTOR
Shaft End CharacteristicA9 SINGLE STYLE SINGLE END
Terminal Type and Quantity3 WIRE LEAD
Rotor Speed Rating in RPM550.0 SINGLE FULL LOAD
Temp Rating-54.0 OPERATING CELSIUS AND 50.0 OPERATING CELSIUS
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Unit of IssueEA
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5340-01-723-3351T-21A POSSIBLE MATCH
ANODE,CORROSION PREVENTIVE
Possible match (shared part number)Caldwell Casting Co., Inc.
Cross-Reference Index
Part NumberManufacturer
T21A PRIMARY Mpc Products Corporation Dba Woodward Mpc, Inc. (USA)
Reference documents
ReferenceMeaning
77C719690 7/2 Vendor item drawing reference
Lockheed Martin Corporation Div Rms
Related Parts
5340-01-723-3351POSSIBLE MATCH
ANODE,CORROSION PREVENTIVE
T-21A

Frequently Asked Questions

What is NSN 6105-01-160-7719?

NSN 6105-01-160-7719 is a Motor,alternating Current, manufactured by Mpc Products Corporation Dba Woodward Mpc, Inc., classified under FSC 6105, Motors, Electrical. Status: active.

What part numbers are listed for NSN 6105-01-160-7719?

NSN 6105-01-160-7719 has 1 manufacturer part number on file: T21A (Mpc Products Corporation Dba Woodward Mpc, Inc.).

What NSN replaces 6105-01-160-7719?

1 possible match (shared part number, not a government interchangeability claim): 5340-01-723-3351. Verify interchangeability with system specifications before substitution.

What are the specifications of T21A?

Key specifications for T21A: Keyway Depth: 0.057 INCHES NOMINAL SINGLE END IN; Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S); Duty Cycle: INTERMITTENT; Phase: THREE INPUT. 27 specifications are documented in the U.S. Government catalog.

Is NSN 6105-01-160-7719 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com