PartsTable TECHNICAL DATA SHEET
NSN 6105-01-117-0870Government record, cited

Motor, Direct Current6105-01-117-0870

NSN 6105-01-117-0870 · NIIN 011170870
FSC 6105 — Motors, Electrical · FSG 61 — Electric Wire, Power, and Distribution Equipment
Government record, cited
Also searched as  6105-01-117-0870 · 6105011170870 · NIIN 011170870 · 01-117-0870 · FSC 6105 Motors, Electrical · 2500-6GR1 · 2500-6-GP2 · 2500-6-GP2
Nearby stock numbers  ·
Features
  • Motor,direct Current — FSC 6105
  • Keyway Depth: 0.155 INCHES MINIMUM AND 0.156 INCHES MAXIMUM SECOND END IN
  • Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S)
  • Duty Cycle: INTERMITTENT
  • Shaft Diameter: 0.750 INCHES NOMINAL SECOND END IN
  • Shaft Diameter: 1.437 INCHES MINIMUM AND 1.438 INCHES MAXIMUM FIRST END IN
  • Winding Type: SHUNT WOUND
  • Mounting Method: FACE
Identification
  • NSN: 6105-01-117-0870
  • NIIN: 011170870
  • FSC: 6105 — Motors, Electrical
  • FSG: 61 — Electric Wire, Power, and Distribution Equipment
General Description

The Motor,direct Current, cataloged under National Stock Number 6105-01-117-0870, is classified within Federal Supply Class 6105 (Motors, Electrical) of the Electric Wire, Power, and Distribution Equipment group. Government technical data includes 27 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.

Technical Specifications
ParameterValue
NSN6105-01-117-0870
Item NameMotor,direct Current
FSC / FSG6105 / 61 — Motors, Electrical
StatusACTIVE
Keyway Depth0.155 INCHES MINIMUM AND 0.156 INCHES MAXIMUM SECOND END IN
Mounting Facility Type and Quantity4 UNTHREADED HOLE(S)
Duty CycleINTERMITTENT
Shaft Diameter0.750 INCHES NOMINAL SECOND END IN
Shaft Diameter1.437 INCHES MINIMUM AND 1.438 INCHES MAXIMUM FIRST END IN
Winding TypeSHUNT WOUND
Mounting MethodFACE
Thread Length0.3750 INCHES NOMINAL SINGLE END IN
Frame Size Designation500VY
Cooling MethodSELF-VENTILATED
Time Interval10.0 MINUTES MAXIMUM ON
Shaft Rotation DirectionCLOCKWISE SINGLE END
Features ProvidedHORIZONTAL MOUNTING POSITION
Mounting Facility Circle Diameter20.000 INCHES IN
Thread DirectionRIGHT-HAND FIRST END
Nominal Thread Size0.750 INCHES FIRST END IN
Connection Type and Voltage Rating in Volts250.0 LINE TO NEUTRAL SINGLE INPUT
Taper Length2.7120 INCHES NOMINAL SINGLE END IN
Keyway Length2.3120 INCHES NOMINAL SINGLE END IN
Keyway Width0.312 INCHES MINIMUM AND 0.313 INCHES MAXIMUM FIRST END IN
Length of Shaft From Housing4.250 INCHES SINGLE END IN
Current Rating in Amps355.000 SINGLE INPUT
Enclosure FeatureDRIPPROOF PROTECTED-15 DEG
Taper0.600 PER FOOT IN INCHES SINGLE END
Current Rating MethodLOAD
Thread Class2A FIRST END A
Power Rating110.0000 HORSEPOWER OUTPUT
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeS
Unit of IssueEA
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
2500-6GR1 5/9 Secondary reference
U.S. Government activity
2500-6-GP2 3/2 Design control — primary reference
U.S. Government activity
2500-6-GP2 5/9 Secondary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 6105 — Motors, Electrical
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
6105-00-001-1471
6105-00-001-1471 · Item name not on file
6105-00-001-1473
6105-00-001-1473 · Item name not on file
6105-00-001-1497
6105-00-001-1497 · Item name not on file
6105-00-001-1710
6105-00-001-1710 · Item name not on file
6105-00-001-1712
MOTOR,ALTERNATING CURRENT
6105-00-001-2097
6105-00-001-2097 · Item name not on file
6105-00-001-2098
6105-00-001-2098 · Item name not on file
6105-00-001-3680
MOTOR,DIRECT CURRENT

Frequently Asked Questions

What is NSN 6105-01-117-0870?

NSN 6105-01-117-0870 is a Motor,direct Current, classified under FSC 6105, Motors, Electrical. Status: active.

What are the specifications of 6105-01-117-0870?

Key specifications for 6105-01-117-0870: Keyway Depth: 0.155 INCHES MINIMUM AND 0.156 INCHES MAXIMUM SECOND END IN; Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S); Duty Cycle: INTERMITTENT; Shaft Diameter: 0.750 INCHES NOMINAL SECOND END IN. 27 specifications are documented in the U.S. Government catalog.

Is NSN 6105-01-117-0870 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com