PartsTable TECHNICAL DATA SHEET
NSN 6105-01-107-7519Government record, cited

Motor, Alternating Current6105-01-107-7519

NSN 6105-01-107-7519 · NIIN 011077519
FSC 6105 — Motors, Electrical · FSG 61 — Electric Wire, Power, and Distribution Equipment
Government record, cited
Also searched as  6105-01-107-7519 · 6105011077519 · NIIN 011077519 · 01-107-7519 · FSC 6105 Motors, Electrical · 5008T · 5KSM59LS2262BS
Nearby stock numbers  ·
Features
  • Motor,alternating Current — FSC 6105
  • Mounting Facility Type and Quantity: 4 THREADED STUD(S)
  • Duty Cycle: CONTINUOUS
  • Phase: SINGLE INPUT
  • Shaft Diameter: 0.2500 INCHES NOMINAL SINGLE END IN
  • Frequency in Hertz: 60.0 INPUT
  • Winding Type: INDUCTION-SHADED POLE
  • Mounting Method: FACE
Identification
  • NSN: 6105-01-107-7519
  • NIIN: 011077519
  • FSC: 6105 — Motors, Electrical
  • FSG: 61 — Electric Wire, Power, and Distribution Equipment
General Description

The Motor,alternating Current, cataloged under National Stock Number 6105-01-107-7519, is classified within Federal Supply Class 6105 (Motors, Electrical) of the Electric Wire, Power, and Distribution Equipment group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.

Technical Specifications
ParameterValue
NSN6105-01-107-7519
Item NameMotor,alternating Current
FSC / FSG6105 / 61 — Motors, Electrical
StatusACTIVE
Mounting Facility Type and Quantity4 THREADED STUD(S)
Duty CycleCONTINUOUS
PhaseSINGLE INPUT
Shaft Diameter0.2500 INCHES NOMINAL SINGLE END IN
Frequency in Hertz60.0 INPUT
Winding TypeINDUCTION-SHADED POLE
Mounting MethodFACE
Cooling MethodNATURAL CONVECTION VENTILATED
Shaft Rotation DirectionCOUNTERCLOCKWISE SINGLE END
Features ProvidedHORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION
Mounting Facility Circle Diameter2.875 INCHES IN
Flatted Portion Length2.0000 INCHES NOMINAL SINGLE END IN
Connection Type and Voltage Rating in Volts208.0 LINE TO NEUTRAL LOW OR 230.0 LINE TO NEUTRAL HIGH INPUT
Specific UseLOW TEMP UNIT COOLER MODELS FL42A;FL65;FL92;FL125A;LET45;LET72;LET90;LET135;LET180;LET225;LET270
Length of Shaft From Housing3.000 INCHES SINGLE END IN
Current Rating in Amps1.100 SINGLE INPUT
Enclosure FeatureOPEN PROTECTED
Current Rating MethodLOAD
Power Rating0.0500 HORSEPOWER OUTPUT
Shaft End CharacteristicA5 SINGLE STYLE SINGLE END
Terminal Type and Quantity1 PLUG
Rotor Speed Rating in RPM1550.0 SINGLE FULL LOAD
Inclosure SpecificationCOMMERCIAL
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Unit of IssueEA
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
5008T 3/9 Design control — primary reference
Gulf and Western Mfg Co Bohn Heat Transfer Group
5KSM59LS2262BS 5/1 Secondary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 6105 — Motors, Electrical
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
6105-00-001-1471
6105-00-001-1471 · Item name not on file
6105-00-001-1473
6105-00-001-1473 · Item name not on file
6105-00-001-1497
6105-00-001-1497 · Item name not on file
6105-00-001-1710
6105-00-001-1710 · Item name not on file
6105-00-001-1712
MOTOR,ALTERNATING CURRENT
6105-00-001-2097
6105-00-001-2097 · Item name not on file
6105-00-001-2098
6105-00-001-2098 · Item name not on file
6105-00-001-3680
MOTOR,DIRECT CURRENT

Frequently Asked Questions

What is NSN 6105-01-107-7519?

NSN 6105-01-107-7519 is a Motor,alternating Current, classified under FSC 6105, Motors, Electrical. Status: active.

What are the specifications of 6105-01-107-7519?

Key specifications for 6105-01-107-7519: Mounting Facility Type and Quantity: 4 THREADED STUD(S); Duty Cycle: CONTINUOUS; Phase: SINGLE INPUT; Shaft Diameter: 0.2500 INCHES NOMINAL SINGLE END IN. 23 specifications are documented in the U.S. Government catalog.

Is NSN 6105-01-107-7519 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com