The Motor,direct Current, cataloged under National Stock Number 6105-01-055-6569, is classified within Federal Supply Class 6105 (Motors, Electrical) of the Electric Wire, Power, and Distribution Equipment group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 6105-01-055-6569 |
| Item Name | Motor,direct Current |
| FSC / FSG | 6105 / 61 — Motors, Electrical |
| Status | ACTIVE |
| Mounting Facility Type and Quantity | 3 UNTHREADED HOLE(S) |
| Duty Cycle | INTERMITTENT |
| Spline Minor Diameter | 0.1901 INCHES NOMINAL SINGLE END IN |
| Shaft Diameter | 0.2857 INCHES NOMINAL SINGLE END IN |
| Mounting Method | FLANGE |
| Spline Length | 0.2500 INCHES NOMINAL SINGLE END IN |
| Time Interval | 1.0 MINUTES MAXIMUM ON AND 3.0 MINUTES MINIMUM OFF |
| Shaft Rotation Direction | CLOCKWISE OR COUNTERCLOCKWISE SINGLE END |
| Mounting Facility Circle Diameter | 2.700 INCHES IN |
| Spline Quantity | 11 SINGLE END |
| Connection Type and Voltage Rating in Volts | 28.0 LINE TO NEUTRAL SINGLE INPUT |
| Torque Rating and Type | 10.0 INCH-OUNCES RUNNING AND 60.0 INCH-OUNCES STALLED IN |
| Length of Shaft From Housing | 0.437 INCHES SINGLE END IN |
| Current Rating in Amps | 12.000 SINGLE INPUT |
| Shaft End Characteristic | A14 SINGLE STYLE SINGLE END |
| Rotor Speed Rating in RPM | 10900.0 SINGLE FULL LOAD |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL B — Remove Demilitarization Key Points |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| FSH41 | 5/9 Secondary reference U.S. Government activity |
| FSH41-1 | 3/2 Design control — primary reference U.S. Government activity |
NSN 6105-01-055-6569 is a Motor,direct Current, classified under FSC 6105, Motors, Electrical. Status: active.
Key specifications for 6105-01-055-6569: Mounting Facility Type and Quantity: 3 UNTHREADED HOLE(S); Duty Cycle: INTERMITTENT; Spline Minor Diameter: 0.1901 INCHES NOMINAL SINGLE END IN; Shaft Diameter: 0.2857 INCHES NOMINAL SINGLE END IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 6105-01-055-6569 has DEMIL Code B. Demilitarization may be required before disposal or transfer to non-military entities.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.