The Motor,direct Current, cataloged under National Stock Number 6105-01-015-0318, is classified within Federal Supply Class 6105 (Motors, Electrical) of the Electric Wire, Power, and Distribution Equipment group. Government technical data includes 24 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 6105-01-015-0318 |
| Item Name | Motor,direct Current |
| FSC / FSG | 6105 / 61 — Motors, Electrical |
| Status | ACTIVE |
| Mounting Facility Type and Quantity | 4 UNTHREADED HOLE(S) |
| Duty Cycle | INTERMITTENT |
| Spline Minor Diameter | 0.3400 INCHES NOMINAL SINGLE END IN |
| Shaft Diameter | 0.4370 INCHES NOMINAL SINGLE END IN |
| Winding Type | PERMANENT MAGNET |
| Nominal Center to Center Distance Between Mounting Facilities Parallel to Height | 1.344 INCHES IN |
| Mounting Method | PAD |
| Spline Length | 0.7000 INCHES NOMINAL SINGLE END IN |
| Cooling Method | NONVENTILATED |
| Shaft Rotation Direction | CLOCKWISE SINGLE END |
| Maximum Operating Altitude Rating | 40000.0 FEET FT |
| Spline Quantity | 12 SINGLE END |
| Connection Type and Voltage Rating in Volts | 28.0 LINE TO NEUTRAL SINGLE INPUT |
| Torque Rating and Type | 2.1 INCH-POUNDS STALLED IN |
| Nominal Center to Center Distance Between Mounting Facilities Parallel to Width | 1.344 INCHES IN |
| Length of Shaft From Housing | 0.700 INCHES SINGLE END IN |
| Current Rating in Amps | 1.000 SINGLE INPUT |
| Enclosure Feature | EXPLOSION PROOF |
| Current Rating Method | LOAD |
| Shaft End Characteristic | A14 SINGLE STYLE SINGLE END |
| Terminal Type and Quantity | 2 WIRE LEAD |
| Rotor Speed Rating in RPM | 7500.0 SINGLE FULL LOAD |
| Temp Rating | -65.0 OPERATING CELSIUS AND 160.0 OPERATING CELSIUS |
| Inclosure Specification | COMMERCIAL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL Q — CCL Item — Commerce Control List |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Unit of Issue | EA |
| Reference | Meaning |
|---|---|
| PM49-7 | 5/9 Secondary reference U.S. Government activity |
| PM49-11 | 3/2 Design control — primary reference U.S. Government activity |
NSN 6105-01-015-0318 is a Motor,direct Current, classified under FSC 6105, Motors, Electrical. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 2940-01-080-3861. Verify interchangeability with system specifications before substitution.
Key specifications for 6105-01-015-0318: Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S); Duty Cycle: INTERMITTENT; Spline Minor Diameter: 0.3400 INCHES NOMINAL SINGLE END IN; Shaft Diameter: 0.4370 INCHES NOMINAL SINGLE END IN. 24 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 6105-01-015-0318 has DEMIL Code Q. Demilitarization may be required before disposal or transfer to non-military entities.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.