The Motor,alternating Current, cataloged under National Stock Number 6105-00-902-9831, is classified within Federal Supply Class 6105 (Motors, Electrical) of the Electric Wire, Power, and Distribution Equipment group. The manufacturer of record is General Electric Co Motor Business Group. Government technical data includes 27 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 6105-00-902-9831 |
| Primary Part Number | 5K4326Y1N3 |
| Item Name | Motor,alternating Current |
| FSC / FSG | 6105 / 61 — Motors, Electrical |
| Manufacturer | General Electric Co Motor Business Group |
| Status | ACTIVE |
| Mounting Facility Type and Quantity | 4 UNTHREADED HOLE(S) |
| Duty Cycle | CONTINUOUS |
| Phase | THREE INPUT |
| Shaft Diameter | 1.500 INCHES MINIMUM AND 1.878 INCHES MAXIMUM SINGLE END IN |
| Frequency in Hertz | 60.0 INPUT |
| Shaft Center to Mounting Surface Distance | 10.000 INCHES SINGLE END IN |
| Shaft End Style | EXTERNAL THREADED AND TAPERED AND KEYED SINGLE END |
| Winding Type | INDUCTION-SQUIRREL CAGE |
| Mounting Method | FIXED BASE |
| Thread Length | 0.6560 INCHES NOMINAL SINGLE END IN |
| Cooling Method | NONVENTILATED |
| Shaft Rotation Direction | CLOCKWISE OR COUNTERCLOCKWISE SINGLE END |
| Features Provided | HORIZONTAL MOUNTING POSITION |
| Nominal Thread Size | 1.500 INCHES SINGLE END IN |
| Connection Type and Voltage Rating in Volts | 440.0 LINE TO NEUTRAL SINGLE INPUT |
| Taper Length | 1.8750 INCHES NOMINAL SINGLE END IN |
| Nominal Center to Center Distance Between Mounting Facilities Parallel to Length | 13.750 INCHES IN |
| Nominal Center to Center Distance Between Mounting Facilities Parallel to Width | 16.000 INCHES IN |
| Length of Shaft From Housing | 3.406 INCHES SINGLE END IN |
| Enclosure Feature | DRIPPROOF-15 DEG |
| Taper | 1.400 PER FOOT IN INCHES SINGLE END |
| Test Data Document | 81349-MIL-M-17060 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Thread Quantity Per Inch | 18 SINGLE END |
| Power Rating | 50.0000 HORSEPOWER OUTPUT |
| Thread Series Designator | UNEF SINGLE END |
| Rotor Speed Rating in RPM | 3550.0 SINGLE FULL LOAD |
| Temp Rating | 50.0 OPERATING CELSIUS |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Unit of Issue | EA |
| Part Number | Manufacturer |
|---|---|
| 3300F10A7062G01 | General Electric Co Motor Business Group (USA) |
| 5K4326Y1N3 PRIMARY | General Electric Co Motor Business Group (USA) |
| Reference | Meaning |
|---|---|
| 3300F10A7062G01 | 5/9 Secondary reference General Electric Company |
| 3300F10A7062 | 5/9 Secondary reference General Electric Co Outdoor Breaker Business Section |
| MILM17060 | 4/1 Identification reference U.S. Government activity |
| 5K4326Y1N3 | 5/9 Secondary reference General Electric Company |
NSN 6105-00-902-9831 is a Motor,alternating Current, manufactured by General Electric Co Motor Business Group, classified under FSC 6105, Motors, Electrical. Status: active.
NSN 6105-00-902-9831 has 2 manufacturer part numbers on file: 3300F10A7062G01 (General Electric Co Motor Business Group), 5K4326Y1N3 (General Electric Co Motor Business Group).
Key specifications for 5K4326Y1N3: Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S); Duty Cycle: CONTINUOUS; Phase: THREE INPUT; Shaft Diameter: 1.500 INCHES MINIMUM AND 1.878 INCHES MAXIMUM SINGLE END IN. 27 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.