PartsTable TECHNICAL DATA SHEET
NSN 6105-00-795-5984Government record, cited

Motor, Direct Current6105-00-795-5984

NSN 6105-00-795-5984 · NIIN 007955984
FSC 6105 — Motors, Electrical · FSG 61 — Electric Wire, Power, and Distribution Equipment
Government record, cited
Also searched as  6105-00-795-5984 · 6105007955984 · NIIN 007955984 · 00-795-5984 · FSC 6105 Motors, Electrical · 104958-01 · BB14F1 · BB14F1 · 104958-01
Nearby stock numbers  ·
Features
  • Motor,direct Current — FSC 6105
  • Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S)
  • Duty Cycle: INTERMITTENT
  • Shaft Diameter: 0.1780 INCHES NOMINAL SINGLE END IN
  • Winding Type: SERIES WOUND
  • Nominal Center to Center Distance Between Mounting Facilities Parallel to Height: 1.250 INCHES IN
  • Mounting Method: PAD
  • Time Interval: 1.0 MINUTES MAXIMUM ON AND 9.0 MINUTES MINIMUM OFF
Identification
  • NSN: 6105-00-795-5984
  • NIIN: 007955984
  • FSC: 6105 — Motors, Electrical
  • FSG: 61 — Electric Wire, Power, and Distribution Equipment
General Description

The Motor,direct Current, cataloged under National Stock Number 6105-00-795-5984, is classified within Federal Supply Class 6105 (Motors, Electrical) of the Electric Wire, Power, and Distribution Equipment group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN6105-00-795-5984
Item NameMotor,direct Current
FSC / FSG6105 / 61 — Motors, Electrical
StatusACTIVE
Mounting Facility Type and Quantity4 UNTHREADED HOLE(S)
Duty CycleINTERMITTENT
Shaft Diameter0.1780 INCHES NOMINAL SINGLE END IN
Winding TypeSERIES WOUND
Nominal Center to Center Distance Between Mounting Facilities Parallel to Height1.250 INCHES IN
Mounting MethodPAD
Time Interval1.0 MINUTES MAXIMUM ON AND 9.0 MINUTES MINIMUM OFF
Shaft Rotation DirectionCLOCKWISE OR COUNTERCLOCKWISE SINGLE END
Maximum Operating Altitude Rating50000.0 FEET FT
Connection Type and Voltage Rating in Volts26.0 LINE TO NEUTRAL SINGLE INPUT
Nominal Center to Center Distance Between Mounting Facilities Parallel to Width1.250 INCHES IN
Length of Shaft From Housing0.333 INCHES SINGLE END IN
Current Rating in Amps3.500 SINGLE INPUT
Enclosure FeatureTOTALLY ENCLOSED
Power Rating0.0600 HORSEPOWER OUTPUT
Shaft End CharacteristicA14 SINGLE STYLE SINGLE END
Rotor Speed Rating in RPM13500.0 SINGLE FULL LOAD
Temp Rating25.0 OPERATING CELSIUS
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5980-01-367-5993 POSSIBLE MATCH
LIGHT EMITTING DIODE
Possible match (shared part number)
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
104958-01 3/9 Design control — primary reference
Lucas Aerospace Power Equipment Corporation
BB14F1 5/9 Secondary reference
Lucas Aerospace Power Equipment Corporation
BB14F1 C/1 Advisory reference — outside the item-of-supply concept
Safran Power Usa Llc
104958-01 C/1 Advisory reference — outside the item-of-supply concept
Safran Power Usa Llc
Related Parts
5980-01-367-5993POSSIBLE MATCH
LIGHT EMITTING DIODE

Frequently Asked Questions

What is NSN 6105-00-795-5984?

NSN 6105-00-795-5984 is a Motor,direct Current, classified under FSC 6105, Motors, Electrical. Status: active.

What NSN replaces 6105-00-795-5984?

1 possible match (shared part number, not a government interchangeability claim): 5980-01-367-5993. Verify interchangeability with system specifications before substitution.

What are the specifications of 6105-00-795-5984?

Key specifications for 6105-00-795-5984: Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S); Duty Cycle: INTERMITTENT; Shaft Diameter: 0.1780 INCHES NOMINAL SINGLE END IN; Overall Length: 4.239 INCHES IN. 18 specifications are documented in the U.S. Government catalog.

Is NSN 6105-00-795-5984 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com