PartsTable TECHNICAL DATA SHEET
NSN 6105-00-765-8871Government record, cited

Motor-Tachometer Generator6105-00-765-8871

NSN 6105-00-765-8871 · NIIN 007658871
FSC 6105 — Motors, Electrical · FSG 61 — Electric Wire, Power, and Distribution Equipment
Government record, cited
Also searched as  6105-00-765-8871 · 6105007658871 · NIIN 007658871 · 00-765-8871 · FSC 6105 Motors, Electrical
Nearby stock numbers  ·
Features
  • Motor-Tachometer Generator — FSC 6105
  • Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S)
  • Phase: SINGLE INPUT
  • Shaft Diameter: 0.1562 INCHES NOMINAL SINGLE END IN
  • Frequency in Hertz: 400.0 OUTPUT
  • Current Type: AC INPUT
  • Nominal Center to Center Distance Between Mounting Facilities Parallel to Height: 1.625 INCHES IN
  • Calibration Speed in RPM: 1800.0
Identification
  • NSN: 6105-00-765-8871
  • NIIN: 007658871
  • FSC: 6105 — Motors, Electrical
  • FSG: 61 — Electric Wire, Power, and Distribution Equipment
General Description

The Motor-Tachometer Generator, cataloged under National Stock Number 6105-00-765-8871, is classified within Federal Supply Class 6105 (Motors, Electrical) of the Electric Wire, Power, and Distribution Equipment group. Government technical data includes 26 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active. Unit of issue: EA.

Technical Specifications
ParameterValue
NSN6105-00-765-8871
Item NameMotor-Tachometer Generator
FSC / FSG6105 / 61 — Motors, Electrical
StatusACTIVE
Mounting Facility Type and Quantity4 UNTHREADED HOLE(S)
PhaseSINGLE INPUT
Shaft Diameter0.1562 INCHES NOMINAL SINGLE END IN
Frequency in Hertz400.0 OUTPUT
Current TypeAC INPUT
Nominal Center to Center Distance Between Mounting Facilities Parallel to Height1.625 INCHES IN
Calibration Speed in RPM1800.0
Mounting MethodPAD
Cooling MethodNONVENTILATED
Features ProvidedHORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION
Flatted Portion Length1.0000 INCHES NOMINAL SINGLE END IN
Connection Type and Voltage Rating in Volts115.0 LINE TO NEUTRAL SINGLE INPUT
Calibration Voltage Output Type in Volts2.5 AC
Torque Rating and Type0.4 INCH-OUNCES STALLED IN
Nominal Center to Center Distance Between Mounting Facilities Parallel to Width1.625 INCHES IN
Length of Shaft From Housing0.856 INCHES SINGLE END IN
Control Field Voltage Type and Rating in Volts40.0 AC
Enclosure FeatureTOTALLY ENCLOSED
Power Rating13.500 WATTS OUTPUT
Shaft End CharacteristicA5 SINGLE STYLE SINGLE END
Excitor TypeSEPARATELY EXCITED
Terminal Type and Quantity8 SCREW
Flat Depth0.0200 INCHES NOMINAL SINGLE END IN
Rotor Speed Rating in RPM3000.0 SINGLE NO LOAD
Temp Rating85.0 AMBIENT CELSIUS
Inclosure SpecificationCOMMERCIAL
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Unit of IssueEA
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
2840-01-467-8591710410 POSSIBLE MATCH
HUB,COMPRESSOR,AIRCRAFT GAS TURB
Possible match (shared part number)Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
822630 3/9 Design control — primary reference
L3 Aviation Products, Inc. Dba L3 Technologies
Related Parts
2840-01-467-8591POSSIBLE MATCH
HUB,COMPRESSOR,AIRCRAFT GAS TURB
710410

Frequently Asked Questions

What is NSN 6105-00-765-8871?

NSN 6105-00-765-8871 is a Motor-Tachometer Generator, classified under FSC 6105, Motors, Electrical. Status: active.

What NSN replaces 6105-00-765-8871?

1 possible match (shared part number, not a government interchangeability claim): 2840-01-467-8591. Verify interchangeability with system specifications before substitution.

What are the specifications of 6105-00-765-8871?

Key specifications for 6105-00-765-8871: Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S); Phase: SINGLE INPUT; Shaft Diameter: 0.1562 INCHES NOMINAL SINGLE END IN; Frequency in Hertz: 400.0 OUTPUT. 26 specifications are documented in the U.S. Government catalog.

Is NSN 6105-00-765-8871 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com