The Motor,direct Current, cataloged under National Stock Number 6105-00-635-9718, is classified within Federal Supply Class 6105 (No Item Name Available) of the Electric Wire, Power, and Distribution Equipment group. The primary manufacturer of record is Reliance Electric. Government technical data includes 29 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 3 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 6105-00-635-9718 |
| Primary Part Number | 8921 |
| Item Name | Motor,direct Current |
| FSC / FSG | 6105 / 61 — No Item Name Available |
| Manufacturer | Reliance Electric |
| Status | ACTIVE |
| Test Data Document | 81349-MIL-M-2511 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Winding Type | SHUNT WOUND |
| Shaft Rotation Direction | COUNTERCLOCKWISE IDENTICAL ENDS |
| Cooling Method | NATURAL CONVECTION VENTILATED |
| Features Provided | VERTICAL MOUNTING POSITION |
| Bearing Type | ROLLER |
| Current Rating Method | LOAD |
| Keyway Width | 0.7500 INCHES NOMINAL IDENTICAL ENDS IN |
| Connection Type and Voltage Rating in Volts | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| Inclosure Specification | MIL-STD-108 |
| Taper Length | 3.2500 INCHES NOMINAL IDENTICAL ENDS IN |
| Shaft Diameter | 3.0000 INCHES NOMINAL IDENTICAL ENDS IN |
| Time Interval | 30.0 MINUTES MAXIMUM ON |
| Temp Rating | 55.0 AMBIENT CELSIUS AND 40.0 OPERATING CELSIUS |
| Shaft Center to Mounting Surface Distance | 12.625 INCHES SINGLE END IN |
| Duty Cycle | INTERMITTENT |
| Keyway Depth | 0.3750 INCHES NOMINAL IDENTICAL ENDS IN |
| Taper | 1.300 PER FOOT IN INCHES IDENTICAL ENDS |
| Mounting Method | FIXED BASE |
| Length of Shaft From Housing | 6.250 INCHES FIRST END IN |
| Nominal Center to Center Distance Between Mounting Facilities Parallel to Length | 26.625 INCHES IN |
| Current Rating in Amps | 370.000 SINGLE INPUT |
| Mounting Facility Type and Quantity | 4 UNTHREADED HOLE(S) |
| Enclosure Feature | WATERTIGHT |
| Thread Length | 2.1250 INCHES NOMINAL IDENTICAL ENDS IN |
| Shaft End Characteristic | A2 FIRST STYLE AND A29 SECOND STYLE IDENTICAL ENDS |
| Keyway Length | 3.2500 INCHES NOMINAL IDENTICAL ENDS IN |
| Specific Use | MOTOR FOR DRIVING TOWING MACHINE |
| Power Rating | 50.0000 HORSEPOWER OUTPUT |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Unit of Issue | EA |
| Part Number | Manufacturer |
|---|---|
| 8921 | Reliance Electric (USA) |
| MIL-M-17413 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 8921 | Reliance Electric Company Dba Reliance & Dodge Brands (USA) |
NSN 6105-00-635-9718 is a Motor,direct Current, manufactured by Reliance Electric, classified under FSC 6105 (No Item Name Available). Status: active.
NSN 6105-00-635-9718 has 3 cross-referenced part numbers: 8921 (Reliance Electric), MIL-M-17413 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 8921 (Reliance Electric Company Dba Reliance & Dodge Brands).
There are 3 known substitutes for 6105-00-635-9718: 5975-00-345-0679, 6685-01-407-8391, 5985-01-726-1256. Verify interchangeability with system specifications before substitution.
Key specifications for 8921: Test Data Document: 81349-MIL-M-2511 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).; Winding Type: SHUNT WOUND; Shaft Rotation Direction: COUNTERCLOCKWISE IDENTICAL ENDS; Cooling Method: NATURAL CONVECTION VENTILATED. 30 total characteristics are documented in the Federal Logistics Information System.