PartsTable TECHNICAL DATA SHEET
NSN 6105-00-635-4928Government record, cited

Motor, Alternating Current6105-00-635-4928

NSN 6105-00-635-4928 · NIIN 006354928
FSC 6105 — Motors, Electrical · FSG 61 — Electric Wire, Power, and Distribution Equipment
Government record, cited
Also searched as  6105-00-635-4928 · 6105006354928 · NIIN 006354928 · 00-635-4928 · FSC 6105 Motors, Electrical
Nearby stock numbers  ·
Features
  • Motor,alternating Current — FSC 6105
  • Mounting Facility Type and Quantity: 2 THREADED HOLE(S)
  • Duty Cycle: INTERMITTENT
  • Phase: SINGLE INPUT
  • Shaft Diameter: 0.2494 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM SINGLE END IN
  • Frequency in Hertz: 60.0 INPUT
  • Shaft Center to Mounting Surface Distance: 1.594 INCHES SINGLE END IN
  • Winding Type: SERIES WOUND
Identification
  • NSN: 6105-00-635-4928
  • NIIN: 006354928
  • FSC: 6105 — Motors, Electrical
  • FSG: 61 — Electric Wire, Power, and Distribution Equipment
General Description

The Motor,alternating Current, cataloged under National Stock Number 6105-00-635-4928, is classified within Federal Supply Class 6105 (Motors, Electrical) of the Electric Wire, Power, and Distribution Equipment group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.

Technical Specifications
ParameterValue
NSN6105-00-635-4928
Item NameMotor,alternating Current
FSC / FSG6105 / 61 — Motors, Electrical
StatusACTIVE
Mounting Facility Type and Quantity2 THREADED HOLE(S)
Duty CycleINTERMITTENT
PhaseSINGLE INPUT
Shaft Diameter0.2494 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM SINGLE END IN
Frequency in Hertz60.0 INPUT
Shaft Center to Mounting Surface Distance1.594 INCHES SINGLE END IN
Winding TypeSERIES WOUND
Mounting MethodFIXED BASE
Cooling MethodNATURAL CONVECTION VENTILATED
Time Interval1.0 MINUTES MAXIMUM ON AND 9.0 MINUTES MINIMUM OFF
Shaft Rotation DirectionCLOCKWISE SINGLE END
Features ProvidedVERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION
Flatted Portion Length0.6250 INCHES NOMINAL SINGLE END IN
Connection Type and Voltage Rating in Volts40.0 LINE TO NEUTRAL SINGLE INPUT
Nominal Center to Center Distance Between Mounting Facilities Parallel to Length1.938 INCHES IN
Length of Shaft From Housing0.750 INCHES SINGLE END IN
Enclosure FeatureOPEN PROTECTED
Power Rating0.0066 HORSEPOWER OUTPUT
Shaft End CharacteristicA5 SINGLE STYLE SINGLE END
Flat Depth0.0200 INCHES NOMINAL SINGLE END IN
Rotor Speed Rating in RPM4500.0 SINGLE FULL LOAD
Temp Rating60.0 OPERATING CELSIUS
Inclosure SpecificationCOMMERCIAL
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Unit of IssueEA
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
T5818101ALT11 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 6105 — Motors, Electrical
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
6105-00-001-1471
6105-00-001-1471 · Item name not on file
6105-00-001-1473
6105-00-001-1473 · Item name not on file
6105-00-001-1497
6105-00-001-1497 · Item name not on file
6105-00-001-1710
6105-00-001-1710 · Item name not on file
6105-00-001-1712
MOTOR,ALTERNATING CURRENT
6105-00-001-2097
6105-00-001-2097 · Item name not on file
6105-00-001-2098
6105-00-001-2098 · Item name not on file
6105-00-001-3680
MOTOR,DIRECT CURRENT

Frequently Asked Questions

What is NSN 6105-00-635-4928?

NSN 6105-00-635-4928 is a Motor,alternating Current, classified under FSC 6105, Motors, Electrical. Status: active.

What are the specifications of 6105-00-635-4928?

Key specifications for 6105-00-635-4928: Mounting Facility Type and Quantity: 2 THREADED HOLE(S); Duty Cycle: INTERMITTENT; Phase: SINGLE INPUT; Shaft Diameter: 0.2494 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM SINGLE END IN. 23 specifications are documented in the U.S. Government catalog.

Is NSN 6105-00-635-4928 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com