The Motor,direct Current, cataloged under National Stock Number 6105-00-548-1550, is classified within Federal Supply Class 6105 (Motors, Electrical) of the Electric Wire, Power, and Distribution Equipment group. The manufacturer of record is General Electric Company. Government technical data includes 24 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 6105-00-548-1550 |
| Primary Part Number | W8434844ALT4PC1 |
| Item Name | Motor,direct Current |
| FSC / FSG | 6105 / 61 — Motors, Electrical |
| Manufacturer | General Electric Company |
| Status | ACTIVE |
| Mounting Facility Type and Quantity | 4 UNTHREADED HOLE(S) |
| Duty Cycle | INTERMITTENT |
| Shaft Diameter | 1.124 INCHES MINIMUM AND 1.125 INCHES MAXIMUM SINGLE END IN |
| Shaft Center to Mounting Surface Distance | 5.000 INCHES SINGLE END IN |
| Winding Type | COMPOUND WOUND |
| Mounting Method | FIXED BASE |
| Thread Length | 1.0000 INCHES NOMINAL SINGLE END IN |
| Cooling Method | AMBIENT AIR |
| Time Interval | 30.0 MINUTES MAXIMUM ON |
| Shaft Rotation Direction | CLOCKWISE SINGLE END |
| Features Provided | VERTICAL MOUNTING POSITION |
| Connection Type and Voltage Rating in Volts | 250.0 LINE TO NEUTRAL SINGLE INPUT |
| Nominal Center to Center Distance Between Mounting Facilities Parallel to Length | 5.500 INCHES IN |
| Nominal Center to Center Distance Between Mounting Facilities Parallel to Width | 8.000 INCHES IN |
| Length of Shaft From Housing | 8.281 INCHES SINGLE END IN |
| Current Rating in Amps | 5.700 SINGLE INPUT |
| Enclosure Feature | DRIPPROOF-15 DEG |
| Current Rating Method | LOAD |
| Step Diameter | 1.124 INCHES MINIMUM AND 1.128 INCHES MAXIMUM SINGLE END IN |
| Test Data Document | 81349-MIL-M-2511 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Power Rating | 1.5000 HORSEPOWER OUTPUT |
| Rotor Speed Rating in RPM | 1750.0 SINGLE FULL LOAD |
| Temp Rating | 50.0 OPERATING CELSIUS |
| Inclosure Specification | COMMERCIAL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Unit of Issue | EA |
| Part Number | Manufacturer |
|---|---|
| W8434844ALT4PC1 PRIMARY | General Electric Company (USA) |
| 5B203A866 PRIMARY | General Electric Company (USA) |
| Reference | Meaning |
|---|---|
| MIL-M-17413 | 4/1 Identification reference U.S. Government activity |
| 4700-454751PC1 | 3/2 Design control — primary reference U.S. Government activity |
NSN 6105-00-548-1550 is a Motor,direct Current, manufactured by General Electric Company, classified under FSC 6105, Motors, Electrical. Status: active.
NSN 6105-00-548-1550 has 2 manufacturer part numbers on file: W8434844ALT4PC1 (General Electric Company), 5B203A866 (General Electric Company).
Key specifications for W8434844ALT4PC1: Mounting Facility Type and Quantity: 4 UNTHREADED HOLE(S); Duty Cycle: INTERMITTENT; Shaft Diameter: 1.124 INCHES MINIMUM AND 1.125 INCHES MAXIMUM SINGLE END IN; Shaft Center to Mounting Surface Distance: 5.000 INCHES SINGLE END IN. 24 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.