The Motor,direct Current, cataloged under National Stock Number 6105-00-438-5039, is classified within Federal Supply Class 6105 (Motors, Electrical) of the Electric Wire, Power, and Distribution Equipment group. The manufacturer of record is General Electric Co Direct Current Motor and Generator Dept. Government technical data includes 25 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 6105-00-438-5039 |
| Primary Part Number | 2BA40S8 |
| Item Name | Motor,direct Current |
| FSC / FSG | 6105 / 61 — Motors, Electrical |
| Manufacturer | General Electric Co Direct Current Motor and Generator Dept |
| Status | ACTIVE |
| Mounting Facility Type and Quantity | 4 THREADED HOLE(S) |
| Duty Cycle | INTERMITTENT |
| Spline Minor Diameter | 0.2813 INCHES NOMINAL SINGLE END IN |
| Shaft Diameter | 0.3750 INCHES NOMINAL SINGLE END IN |
| Winding Type | SHUNT WOUND |
| Mounting Method | FACE |
| Spline Length | 1.1410 INCHES NOMINAL SINGLE END IN |
| Cooling Method | AMBIENT AIR |
| Time Interval | 0.25 MINUTES MAXIMUM ON |
| Shaft Rotation Direction | CLOCKWISE SINGLE END |
| Features Provided | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| Mounting Facility Circle Diameter | 2.250 INCHES IN |
| Spline Quantity | 11 SINGLE END |
| Connection Type and Voltage Rating in Volts | 28.0 LINE TO NEUTRAL SINGLE INPUT |
| Length of Shaft From Housing | 1.141 INCHES SINGLE END IN |
| Current Rating in Amps | 500.000 SINGLE INPUT |
| Enclosure Feature | GENERAL PURPOSE |
| Current Rating Method | NO LOAD |
| Power Rating | 3.0000 HORSEPOWER OUTPUT |
| Shaft End Characteristic | A14 SINGLE STYLE SINGLE END |
| Terminal Type and Quantity | 1 CONNECTOR, PLUG |
| Rotor Speed Rating in RPM | 6500.0 SINGLE FULL LOAD |
| Temp Rating | -65.0 OPERATING CELSIUS AND 165.0 OPERATING CELSIUS |
| Reference Number Differentiating Characteristics | AS DIFFERENTIATED BY THE MFR SOURCE CONTROL NO. |
| Inclosure Specification | COMMERCIAL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 2BA40S8 | General Electric Co Direct Current Motor and Generator Dept (USA) |
| 905D490-0 | Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate (USA) |
| Reference | Meaning |
|---|---|
| 2BA40S35 | 5/9 Secondary reference General Electric Co Direct Current Motor and Generator Dept |
NSN 6105-00-438-5039 is a Motor,direct Current, manufactured by General Electric Co Direct Current Motor and Generator Dept, classified under FSC 6105, Motors, Electrical. Status: active.
NSN 6105-00-438-5039 has 2 manufacturer part numbers on file: 2BA40S8 (General Electric Co Direct Current Motor and Generator Dept), 905D490-0 (Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate).
1 possible match (shared part number, not a government interchangeability claim): 6105-00-538-5656. Verify interchangeability with system specifications before substitution.
Key specifications for 2BA40S8: Mounting Facility Type and Quantity: 4 THREADED HOLE(S); Duty Cycle: INTERMITTENT; Spline Minor Diameter: 0.2813 INCHES NOMINAL SINGLE END IN; Shaft Diameter: 0.3750 INCHES NOMINAL SINGLE END IN. 25 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.