PartsTable
Technical Data Sheet
Download PDF

610076P4 — NUT,SELF-LOCKING,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

610076P4: NUT,SELF-LOCKING,CLINCH.

The NUT,SELF-LOCKING,CLINCH is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYHEXAMETHYLENE AMIDE OR PLASTIC POLYCAPROLACTAM LOCKING INSERT, nut_style: CLINCH, nut_height: 0.233 INCHES MINIMUM AND 0.239 INCHES MAXIMUM IN, temp_rating: 350.0 FAHRENHEIT NOMINAL DEGF, nut_diameter: 0.198 INCHES MINIMUM AND 0.208 INCHES MAXIMUM IN, pilot_length: 0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-984-6913, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
610076P4
NSN: 5310-00-984-6913
FSC: 5310 — Nuts and Washers
CAGE: 94117 — BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. DBA BAE SYSTEMS (USA)
SPECIFICATIONS
materialPLASTIC POLYHEXAMETHYLENE AMIDE OR PLASTIC POLYCAPROLACTAM LOCKING INSERT
nut_styleCLINCH
nut_height0.233 INCHES MINIMUM AND 0.239 INCHES MAXIMUM IN
temp_rating350.0 FAHRENHEIT NOMINAL DEGF
nut_diameter0.198 INCHES MINIMUM AND 0.208 INCHES MAXIMUM IN
pilot_length0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.158 INCHES MINIMUM AND 0.162 INCHES MAXIMUM IN
locking_featurePREVAILING TORQUE WITH NONMETALLIC INSERT
special_featuresNYLON CAP
thread_directionRIGHT-HAND
NSN5310-00-984-6913
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 610076P4 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
TEMP RATING: 350.0 FAHRENHEIT NOMINAL DEGF
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-M-20693 MIL SPEC 2ND MATERIAL RESPONSE LOCKING INSERT
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
NUT DIAMETER: 0.198 INCHES MINIMUM AND 0.208 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
TEMP RATING350.0 FAHRENHEIT NOMINAL DEGF
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-M-20693 MIL SPEC 2ND MATERIAL RESPONSE LOCKING INSERT
MATERIAL DOCUMENT AND CLASSIFICATIONAISI 303 ASSN STD 1ST MATERIAL RESPONSE NUT
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-M-20693 MIL SPEC 3RD MATERIAL RESPONSE CAP
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.112 INCHES IN
NUT DIAMETER0.198 INCHES MINIMUM AND 0.208 INCHES MAXIMUM IN
PILOT DIAMETER0.158 INCHES MINIMUM AND 0.162 INCHES MAXIMUM IN
PILOT LENGTH0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 4
10121917Reference document
Same NSN cross-reference
Reference document — Informative reference only
002-003716-014Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
79NKCFM2-40Reference document
Same NSN cross-reference
Reference document — Secondary reference
79NKCM2-40Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 610076P4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 610076P4?
610076P4 is a NUT,SELF-LOCKING,CLINCH.
What parts can replace 610076P4?
There are 4 known substitutes for 610076P4: 10121917, 002-003716-014, 79NKCFM2-40 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 610076P4?
610076P4 is cataloged in the U.S. Government catalog under NSN 5310-00-984-6913. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 610076P4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.