PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 610064P73
610064P73 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, nut_style: CLINCH, nut_height: 0.117 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), pilot_diameter: 0.157 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-168-6328, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
610064P73
NSN: 5310-00-168-6328
FSC: 5310
CAGE: 94117 — BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. DBA BAE SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
nut_styleCLINCH
nut_height0.117 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.157 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.188 INCHES NOMINAL IN
nominal_thread_size0.112 INCHES IN
thread_quantity_per_inch40
nondefinitive_spec/std_dataI TYPE AND 1 STYLE
NSN5310-00-168-6328
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 610064P73 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 2B
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 303 OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
THREAD QUANTITY PER INCH: 40
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS2B
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 303 OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
NOMINAL THREAD SIZE0.112 INCHES IN
THREAD QUANTITY PER INCH40
NUT HEIGHT0.117 INCHES NOMINAL IN
PILOT DIAMETER0.157 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
NCN6-1-3Interchangeable
interchangeable cross-reference
interchangeable
MS3214-7Interchangeable
interchangeable cross-reference
interchangeable
8908409Interchangeable
interchangeable cross-reference
interchangeable
10116586Interchangeable
interchangeable cross-reference
interchangeable
34NO62FL4-40Interchangeable
interchangeable cross-reference
interchangeable
486071-6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 610064P73?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 610064P73?
610064P73 is a NUT,PLAIN,CLINCH.
What parts can replace 610064P73?
There are 29 known substitutes for 610064P73: NCN6-1-3, MS3214-7, 8908409 and 26 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 610064P73?
610064P73 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-168-6328. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 610064P73

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026