PartsTable
Technical Data Sheet
Download PDF

60C6UMS6MS63 1-2 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

60C6UMS6MS63 1-2: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 30.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, connection_type: THREADED EXTERNAL PIPE FIRST END, inside_diameter: 0.375 INCHES NOMINAL IN, connection_style: INVERTED FLARE FIRST END, outside_diameter: 0.812 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 4720-00-715-1666, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
60C6UMS6MS63 1-2
NSN: 4720-00-715-1666
FSC: 4720 — Hose and Flexible Tubing
CAGE: 63906 — CONTITECH USA, INC. (USA)
SPECIFICATIONS
seat_angle30.0 DEGREES FIRST END
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
connection_typeTHREADED EXTERNAL PIPE FIRST END
inside_diameter0.375 INCHES NOMINAL IN
connection_styleINVERTED FLARE FIRST END
outside_diameter0.812 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
special_featuresINNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; SUPPLIED W/PIPE ADAPTER,STEEL CADMIUM OR ZINC PLATED,HAVING 3/8 IN. NPTF THDS ON FEMALE END AND 1/4 IN. NPSM THDS ON MALE END IN
thread_directionRIGHT-HAND FIRST END
features_providedELECTROSTATIC DISCHARGE CAPABILITY AND REUSABLE END FITTINGS
operating_pressure4000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure16000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.375 INCHES FIRST END IN
NSN4720-00-715-1666
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 60C6UMS6MS63 1-2 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MEASURING METHOD AND LENGTH: 63.500 INCHES NOMINAL OVERALL IN
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
FITTING COMPONENT AND SURFACE TREATMENT: COMPLETE FITTING CADMIUM FIRST END
•
MINIMUM INSIDE BENDING RADIUS: 5.000 INCHES IN
•
CONNECTION STYLE: INVERTED FLARE FIRST END
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER RUBBER IMPREGNATED BRAIDED FABRIC AND 2ND LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE AND 3RD LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE AND 4TH LAYER RUBBER IMPREGNATED BRAIDED FABRIC AND OUTER LAYER MOLDED RUBBER
•
CONNECTION TYPE: THREADED EXTERNAL PIPE FIRST END
TECHNICAL CHARACTERISTICS
MEASURING METHOD AND LENGTH63.500 INCHES NOMINAL OVERALL IN
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
FITTING COMPONENT AND SURFACE TREATMENTCOMPLETE FITTING CADMIUM FIRST END
MINIMUM INSIDE BENDING RADIUS5.000 INCHES IN
CONNECTION STYLEINVERTED FLARE FIRST END
END CONNECTION DESIGNSTRAIGHT FIRST END
LAYER COMPOSITION AND LOCATION1ST LAYER RUBBER IMPREGNATED BRAIDED FABRIC AND 2ND LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE AND 3RD LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE AND 4TH LAYER RUBBER IMPREGNATED BRAIDED FABRIC AND OUTER LAYER MOLDED RUBBER
CONNECTION TYPETHREADED EXTERNAL PIPE FIRST END
CROSS-SECTIONAL SHAPE STYLEROUND
OUTSIDE DIAMETER0.812 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
58895Reference document
Same NSN cross-reference
Reference document — Secondary reference
6C6UMS6MS63 1-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
58895-63 1-2Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 60C6UMS6MS63 1-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60C6UMS6MS63 1-2?
60C6UMS6MS63 1-2 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 60C6UMS6MS63 1-2?
There are 3 known substitutes for 60C6UMS6MS63 1-2: 58895, 6C6UMS6MS63 1-2, 58895-63 1-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 60C6UMS6MS63 1-2?
60C6UMS6MS63 1-2 is cataloged in the U.S. Government catalog under NSN 4720-00-715-1666. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 60C6UMS6MS63 1-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.