PartsTable
Technical Data Sheet
PartsTable / MRO / 609864
609864 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, cup_width: 1.6875 INCHES NOMINAL IN, body_length: 0.391 INCHES MAXIMUM IN, body_diameter: 0.141 INCHES MAXIMUM IN, bore_diameter: 1.9675 INCHES NOMINAL IN, overall_width: 2.5000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-2258, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 609864
NSN: 3110-00-198-2258
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width1.6875 INCHES NOMINAL IN
body_length0.391 INCHES MAXIMUM IN
body_diameter0.141 INCHES MAXIMUM IN
bore_diameter1.9675 INCHES NOMINAL IN
overall_width2.5000 INCHES NOMINAL IN
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
standout_width0.4060 INCHES NOMINAL IN
terminal_length1.000 INCHES MINIMUM IN
special_featuresW/SPACER,HOLE AND GROVE IN CUP
style_designatorAXIAL TERMINAL EACH END
NSN3110-00-198-2258
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 609864 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 1.9675 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0200 INCHES NOMINAL IN
•
CUP WIDTH: 1.6875 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE CORNER RADIUS: 0.0800 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER1.9675 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0200 INCHES NOMINAL IN
SPECIAL FEATURESW/SPACER,HOLE AND GROVE IN CUP
CUP WIDTH1.6875 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
OVERALL WIDTH2.5000 INCHES NOMINAL IN
CONE CORNER RADIUS0.0800 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORSTRAIGHT BORE, DOUBLE CUP, SINGLE CONES, STEEP ANGLE
OVERALL OUTSIDE DIAMETER4.3310 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
HR42-64Interchangeable
interchangeable cross-reference
interchangeable
6098-64Interchangeable
interchangeable cross-reference
interchangeable
101A64Interchangeable
interchangeable cross-reference
interchangeable
EA305396ZDInterchangeable
Same NIIN cross-reference
interchangeable
442093Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 609864?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 609864?
609864 is a RESISTOR,FIXED,WIRE WOUND. It is classified as a MRO (MRO_GENERAL).
What parts can replace 609864?
There are 5 known substitutes for 609864: HR42-64, 6098-64, 101A64 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 609864?
609864 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-2258. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 609864

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026