PartsTable
Technical Data Sheet
Download PDF

6098527 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6098527: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include end_radius: 1.500 INCHES NOMINAL IN, fork_depth: 11.670 INCHES NOMINAL IN, shank_length: 0.820 INCHES NOMINAL IN, thread_class: 2A ROD CONNECTION A, hole_diameter: 1.378 INCHES MINIMUM AND 1.386 INCHES MAXIMUM IN, overall_width: 5.020 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-312-7718, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6098527
NSN: 5340-01-312-7718
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
end_radius1.500 INCHES NOMINAL IN
fork_depth11.670 INCHES NOMINAL IN
shank_length0.820 INCHES NOMINAL IN
thread_class2A ROD CONNECTION A
hole_diameter1.378 INCHES MINIMUM AND 1.386 INCHES MAXIMUM IN
overall_width5.020 INCHES NOMINAL IN
thread_length0.820 INCHES NOMINAL ROD CONNECTION IN
overall_height2.500 INCHES NOMINAL IN
shank_diameter1.125 INCHES NOMINAL IN
fork_span_width4.280 INCHES NOMINAL IN
special_features4 HOLES EQUALLY SPACED AROUND PIVOT PIN HOLE ON A 1.625 IN. DIA,0.138-32 UNC-2B; 4 HOLES THRU EA LEG,ONE HOLE THRU ONE LEG 0.250-20 UNC-2B IN
thread_directionRIGHT-HAND ROD CONNECTION
NSN5340-01-312-7718
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6098527 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 1.125 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 4.280 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.370 INCHES NOMINAL IN
•
END RADIUS: 1.500 INCHES NOMINAL IN
•
THREAD LENGTH: 0.820 INCHES NOMINAL ROD CONNECTION IN
•
SHANK LENGTH: 0.820 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER1.125 INCHES NOMINAL IN
OVERALL HEIGHT2.500 INCHES NOMINAL IN
FORK SPAN WIDTH4.280 INCHES NOMINAL IN
FORK ARM THICKNESS0.370 INCHES NOMINAL IN
END RADIUS1.500 INCHES NOMINAL IN
THREAD LENGTH0.820 INCHES NOMINAL ROD CONNECTION IN
SHANK LENGTH0.820 INCHES NOMINAL IN
OVERALL WIDTH5.020 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
NOMINAL THREAD SIZE1.125 INCHES ROD CONNECTION IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6098527?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6098527?
6098527 is a CLEVIS,ROD END.
What is the NSN for 6098527?
6098527 is cataloged in the U.S. Government catalog under NSN 5340-01-312-7718. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6098527

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.