PartsTable
Technical Data Sheet
Download PDF

6097178 — COVER,ACCESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6097178: COVER,ACCESS.

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include width: 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM IN, length: 1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM IN, material: GLASS FIBER, hole_diameter: 0.021 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN, securing_device_type: SPECIAL, peripheral_shape_style: RECTANGLE, MULTI HOLES. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-399-2704, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6097178
NSN: 5340-01-399-2704
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
width0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM IN
length1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM IN
materialGLASS FIBER
hole_diameter0.021 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN
securing_device_typeSPECIAL
peripheral_shape_styleRECTANGLE, MULTI HOLES
cross-sectional_shape_styleRECESS, SAME SHAPE AS THE PERIPHERY
mounting_opening_shape_styleUNTHREADED HOLE
distance_between_holes_along_length1.400 INCHES NOMINAL IN
material_document_and_classificationMIL-M-14 TYPE SDG-F MIL SPEC SINGLE MATERIAL RESPONSE
distance_from_first_hole_centerline_to_end_along_width0.500 INCHES NOMINAL IN
distance_from_first_hole_centerline_to_end_along_length0.300 INCHES NOMINAL IN
NSN5340-01-399-2704
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6097178 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH: 0.500 INCHES NOMINAL IN
•
LENGTH: 1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM IN
•
DISTANCE BETWEEN HOLES ALONG LENGTH: 1.400 INCHES NOMINAL IN
•
MOUNTING OPENING SHAPE STYLE: UNTHREADED HOLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-M-14 TYPE SDG-F MIL SPEC SINGLE MATERIAL RESPONSE
•
CROSS-SECTIONAL SHAPE STYLE: RECESS, SAME SHAPE AS THE PERIPHERY
•
SECURING DEVICE TYPE: SPECIAL
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH: 0.300 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH0.500 INCHES NOMINAL IN
LENGTH1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM IN
DISTANCE BETWEEN HOLES ALONG LENGTH1.400 INCHES NOMINAL IN
MOUNTING OPENING SHAPE STYLEUNTHREADED HOLE
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-M-14 TYPE SDG-F MIL SPEC SINGLE MATERIAL RESPONSE
CROSS-SECTIONAL SHAPE STYLERECESS, SAME SHAPE AS THE PERIPHERY
SECURING DEVICE TYPESPECIAL
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH0.300 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLERECTANGLE, MULTI HOLES
WIDTH0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6097178?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6097178?
6097178 is a COVER,ACCESS.
What is the NSN for 6097178?
6097178 is cataloged in the U.S. Government catalog under NSN 5340-01-399-2704. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6097178

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.