PartsTable
Technical Data Sheet
Download PDF

609418-7 — BRUSH SET,ELECTRICAL CONTACT

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

609418-7: BRUSH SET,ELECTRICAL CONTACT.

The BRUSH SET,ELECTRICAL CONTACT is a the manufacturer industrial component. Key specifications include material: STEEL, link_style: PIN, link_plate_width: 0.307 INCHES NOMINAL IN, pin_overall_length: 0.5312 INCHES NOMINAL IN, pin_fastening_method: RIVETED AND SPRING CLIP, nominal_pitch_distance: 0.375 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 3020-00-231-8741, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
609418-7
NSN: 3020-00-231-8741
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 80020 — NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION JOINT BASE JBMDL (USA)
SPECIFICATIONS
materialSTEEL
link_stylePIN
link_plate_width0.307 INCHES NOMINAL IN
link_row_quantity1
pin_overall_length0.5312 INCHES NOMINAL IN
pin_fastening_methodRIVETED AND SPRING CLIP
nominal_pitch_distance0.375 INCHES IN
minimum_tensile_strength2100 POUNDS PER SQUARE INCH LBS
link_pin_nominal_diameter0.1410 INCHES IN
link_plate_nominal_thickness0.0500 INCHES IN
link_nominal_width_between_plates0.2875 INCHES IN
NSN3020-00-231-8741
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available BRUSH SET,ELECTRICAL CONTACT TITLE COMPONENT PN 609418-7 MFR BRUSH SET,ELECTRICAL C
KEY FEATURES
•
LINK PLATE NOMINAL THICKNESS: 0.0500 INCHES IN
•
LINK STYLE: PIN
•
LINK PIN NOMINAL DIAMETER: 0.1410 INCHES IN
•
PIN OVERALL LENGTH: 0.5312 INCHES NOMINAL IN
•
NOMINAL PITCH DISTANCE: 0.375 INCHES IN
•
PIN FASTENING METHOD: RIVETED AND SPRING CLIP
•
MINIMUM TENSILE STRENGTH: 2100 POUNDS PER SQUARE INCH LBS
•
LINK ROW QUANTITY: 1
TECHNICAL CHARACTERISTICS
LINK PLATE NOMINAL THICKNESS0.0500 INCHES IN
LINK STYLEPIN
LINK PIN NOMINAL DIAMETER0.1410 INCHES IN
PIN OVERALL LENGTH0.5312 INCHES NOMINAL IN
NOMINAL PITCH DISTANCE0.375 INCHES IN
PIN FASTENING METHODRIVETED AND SPRING CLIP
MINIMUM TENSILE STRENGTH2100 POUNDS PER SQUARE INCH LBS
LINK ROW QUANTITY1
MATERIALSTEEL
LINK NOMINAL WIDTH BETWEEN PLATES0.2875 INCHES IN
SUBSTITUTES & CROSS-REFERENCES 9
MILSTD421Reference document
Same NSN cross-reference
Reference document — Secondary reference
575-2100-1444015PC32Reference document
Same NSN cross-reference
Reference document — Secondary reference
400-0445Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
C4282Reference document
Same NSN cross-reference
Reference document — Secondary reference
CD2893SUB1PC2BReference document
Same NSN cross-reference
Reference document — Secondary reference
NX2341PC20Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 609418-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 609418-7?
609418-7 is a BRUSH SET,ELECTRICAL CONTACT.
What parts can replace 609418-7?
There are 9 known substitutes for 609418-7: MILSTD421, 575-2100-1444015PC32, 400-0445 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 609418-7?
609418-7 is cataloged in the U.S. Government catalog under NSN 3020-00-231-8741. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 609418-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.