PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 60889PC103
60889PC103 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.562 INCHES NOMINAL IN, housing_bore_diameter: 7.000 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 5.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-2132, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
60889PC103
NSN: 5330-00-154-2132
FSC: 5330
CAGE: 65177 — PATTERSON PUMP CO DIV PATTERSON PUMP COMPANY (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.562 INCHES NOMINAL IN
housing_bore_diameter7.000 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter5.750 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-154-2132
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 60889PC103 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL CASE
•
ACCOMMODATED SHAFT DIAMETER: 5.750 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 0.562 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 7.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL CASE
ACCOMMODATED SHAFT DIAMETER5.750 INCHES NOMINAL IN
CASE STYLESQUARE
SEAL WIDTH0.562 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER7.000 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
P3-86Interchangeable
interchangeable cross-reference
interchangeable
3-86Interchangeable
interchangeable cross-reference
interchangeable
P11-86FInterchangeable
interchangeable cross-reference
interchangeable
WE2145Interchangeable
interchangeable cross-reference
interchangeable
722809-5Interchangeable
interchangeable cross-reference
interchangeable
8537Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 60889PC103?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60889PC103?
60889PC103 is a SEAL,PLAIN ENCASED.
What parts can replace 60889PC103?
There are 30 known substitutes for 60889PC103: P3-86, 3-86, P11-86F and 27 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 60889PC103?
60889PC103 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-2132. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 60889PC103

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026