PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 60834-119
60834-119 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.562 INCHES NOMINAL IN, housing_bore_diameter: 7.125 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 5.875 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-1562, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
60834-119
NSN: 5330-00-154-1562
FSC: 5330
CAGE: 65177 — PATTERSON PUMP CO DIV PATTERSON PUMP COMPANY (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.562 INCHES NOMINAL IN
housing_bore_diameter7.125 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter5.875 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-154-1562
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 60834-119 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL CASE
•
HOUSING BORE DIAMETER: 7.125 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 5.875 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SEALING ELEMENT STYLE: ANGULAR
•
SEAL WIDTH: 0.562 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
HOUSING BORE DIAMETER7.125 INCHES NOMINAL IN
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER5.875 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH0.562 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
039535Interchangeable
interchangeable cross-reference
interchangeable
CG-149Interchangeable
interchangeable cross-reference
interchangeable
C7341S3Interchangeable
interchangeable cross-reference
interchangeable
CR18Interchangeable
interchangeable cross-reference
interchangeable
CR18EInterchangeable
interchangeable cross-reference
interchangeable
7393206Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 60834-119?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60834-119?
60834-119 is a SEAL,PLAIN ENCASED.
What parts can replace 60834-119?
There are 14 known substitutes for 60834-119: 039535, CG-149, C7341S3 and 11 more. Substitute compatibility should be verified for your specific system.
Is 60834-119 still available?
60834-119 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 60834-119

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026