PartsTable
Technical Data Sheet
Download PDF

6083-1CC — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6083-1CC: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN, length: 1.040 INCHES MINIMUM AND 1.060 INCHES MAXIMUM IN, material: COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL, hole_diameter: 0.127 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN, overall_height: 1.013 INCHES MINIMUM AND 1.033 INCHES MAXIMUM IN, surface_treatment: CADMIUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-161-1234, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6083-1CC
NSN: 5340-00-161-1234
FSC: 5340 — Hardware, Commercial
CAGE: 00779 — TE CONNECTIVITY CORPORATION (USA)
SPECIFICATIONS
width0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
length1.040 INCHES MINIMUM AND 1.060 INCHES MAXIMUM IN
materialCOPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
hole_diameter0.127 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
overall_height1.013 INCHES MINIMUM AND 1.033 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
material_thickness0.024 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN
loop/holding_dimension0.261 INCHES MINIMUM AND 0.271 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.599 INCHES NOMINAL IN
material_document_and_classificationQQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
NSN5340-00-161-1234
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6083-1CC MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.040 INCHES MINIMUM AND 1.060 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
LOOP/HOLDING DIMENSION: 0.261 INCHES MINIMUM AND 0.271 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.024 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.599 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
WIDTH: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.013 INCHES MINIMUM AND 1.033 INCHES MAXIMUM IN
LENGTH1.040 INCHES MINIMUM AND 1.060 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
LOOP/HOLDING DIMENSION0.261 INCHES MINIMUM AND 0.271 INCHES MAXIMUM IN
MATERIAL THICKNESS0.024 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.599 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
WIDTH0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
HOLE DIAMETER0.127 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6083-1CC?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6083-1CC?
6083-1CC is a CLIP,SPRING TENSION.
What is the NSN for 6083-1CC?
6083-1CC is cataloged in the U.S. Government catalog under NSN 5340-00-161-1234. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6083-1CC

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.