PartsTable
Technical Data Sheet
Download PDF

6082-5A — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6082-5A: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, length: 0.842 INCHES MINIMUM AND 0.862 INCHES MAXIMUM IN, hole_diameter: 0.127 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN, overall_height: 0.982 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN, surface_treatment: CADMIUM OVERALL, material_thickness: 0.019 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-070-6972, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6082-5A
NSN: 5340-01-070-6972
FSC: 5340 — Hardware, Commercial
CAGE: 00779 — TE CONNECTIVITY CORPORATION (USA)
SPECIFICATIONS
width0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
length0.842 INCHES MINIMUM AND 0.862 INCHES MAXIMUM IN
hole_diameter0.127 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
overall_height0.982 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
material_thickness0.019 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
loop/holding_dimension0.807 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.547 INCHES NOMINAL IN
NSN5340-01-070-6972
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6082-5A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.842 INCHES MINIMUM AND 0.862 INCHES MAXIMUM IN
•
LOOP/HOLDING DIMENSION: 0.807 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.019 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.547 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
WIDTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.127 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.982 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN
LENGTH0.842 INCHES MINIMUM AND 0.862 INCHES MAXIMUM IN
LOOP/HOLDING DIMENSION0.807 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
MATERIAL THICKNESS0.019 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.547 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
WIDTH0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
HOLE DIAMETER0.127 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6082-5A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6082-5A?
6082-5A is a CLIP,SPRING TENSION.
What is the NSN for 6082-5A?
6082-5A is cataloged in the U.S. Government catalog under NSN 5340-01-070-6972. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6082-5A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.