PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 608164
608164 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER AND RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN, housing_bore_diameter: 6.625 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 5.375 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-1640, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
608164
NSN: 5330-00-291-1640
FSC: 5330
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
materialLEATHER AND RUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
housing_bore_diameter6.625 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter5.375 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-291-1640
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 608164 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: LEATHER AND RUBBER SYNTHETIC SEALING ELEMENT
•
ACCOMMODATED SHAFT DIAMETER: 5.375 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 6.625 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALLEATHER AND RUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER5.375 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
MATERIALSTEEL CASE
HOUSING BORE DIAMETER6.625 INCHES NOMINAL IN
CASE STYLESQUARE
SEAL WIDTH0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
55101Interchangeable
interchangeable cross-reference
interchangeable
55101/707569Interchangeable
interchangeable cross-reference
interchangeable
55105Interchangeable
interchangeable cross-reference
interchangeable
M5510-5Interchangeable
interchangeable cross-reference
interchangeable
91554158Interchangeable
interchangeable cross-reference
interchangeable
UH2-5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 608164?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 608164?
608164 is a SEAL,PLAIN ENCASED.
What parts can replace 608164?
There are 30 known substitutes for 608164: 55101, 55101/707569, 55105 and 27 more. Substitute compatibility should be verified for your specific system.
Is 608164 still available?
608164 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 608164

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026