PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 608-5795050 ITEM 6
608-5795050 ITEM 6 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, design_type: LOOP ENGAGING, hole_diameter: 0.218 INCHES NOMINAL IN, overall_width: 1.875 INCHES NOMINAL IN, overall_height: 0.625 INCHES NOMINAL IN, overall_length: 3.625 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-5223, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
608-5795050 ITEM 6
NSN: 5340-00-205-5223
FSC: 5340
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL OVERALL
design_typeLOOP ENGAGING
hole_diameter0.218 INCHES NOMINAL IN
hole_quantity3
overall_width1.875 INCHES NOMINAL IN
overall_height0.625 INCHES NOMINAL IN
overall_length3.625 INCHES NOMINAL IN
operation_methodLEVER HANDLE
style_designatorLEVER WITH SPRING
catch_strike_styleMORTISE
NSN5340-00-205-5223
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 608-5795050 ITEM 6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: LEVER WITH SPRING
•
HOLE QUANTITY: 3
•
DESIGN TYPE: LOOP ENGAGING
•
OPERATION METHOD: LEVER HANDLE
•
HOLE DIAMETER: 0.218 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
STYLE DESIGNATORLEVER WITH SPRING
HOLE QUANTITY3
DESIGN TYPELOOP ENGAGING
OVERALL LENGTH3.625 INCHES NOMINAL IN
OPERATION METHODLEVER HANDLE
OVERALL HEIGHT0.625 INCHES NOMINAL IN
HOLE DIAMETER0.218 INCHES NOMINAL IN
OVERALL WIDTH1.875 INCHES NOMINAL IN
CATCH STRIKE STYLEMORTISE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
804Upgraded Successor
successor cross-reference
successor
BL713999-3Upgraded Successor
successor cross-reference
successor
7608291Upgraded Successor
successor cross-reference
successor
DC1-5-28/5Upgraded Successor
successor cross-reference
successor
DG1-5-28/5Upgraded Successor
successor cross-reference
successor
50-00392-21Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 608-5795050 ITEM 6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 608-5795050 ITEM 6?
608-5795050 ITEM 6 is a CATCH,CLAMPING.
What parts can replace 608-5795050 ITEM 6?
There are 25 known substitutes for 608-5795050 ITEM 6: 804, BL713999-3, 7608291 and 22 more. Substitute compatibility should be verified for your specific system.
Is 608-5795050 ITEM 6 still available?
608-5795050 ITEM 6 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 608-5795050 ITEM 6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026