<b>Cloning bootable hard disks</b><br>Hard drives are simply plugged into the docking and clone station. Just one touch on the clone button, which is easily accessible on the device, and the cloning process starts without the need for a USB 3.0 connection to the computer. The hard disk is now cloned 1:1, bit by bit.<br><br><b>All easy</b><br>With the help of HotSwap and Plug & Play, hard disks of the form factors 2.5" (max.
height up to 15 mm) and 3.5" can be easily inserted, exchanged and put into operation. When the docking and clone station is connected to the PC, both hard disks are recognised independently of each other.<br><br><b>RGB ambience</b><br>The bottom of the clone station lights up during operation and provides an atmospheric highlight while working. The aluminium housing in matt black provides a stylish contrast of the highest quality.
The LED display for the cloning progress is embedded on the top of the device. Simple and exciting. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-141-2997, indicating validated use in U.S.
government and defense logistics supply chains.
| material | STEEL COMP 1060 OR STEEL COMP 1064 OR STEEL COMP 1065 OVERALL |
| end_style | SPRING END,GROUND BOTH ENDS |
| coil_quantity | 7 |
| hole_diameter | 0.377 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| overall_width | 1.810 INCHES NOMINAL IN |
| overall_length | 0.340 INCHES MAXIMUM IN |
| hardness_rating | 38.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM |
| inside_diameter | 0.219 INCHES NOMINAL IN |
| mounting_method | UNTHREADED HOLE(S) |
| outside_diameter | 0.680 INCHES MAXIMUM IN |
| overall_diameter | 0.620 INCHES MAXIMUM IN |
| special_features | SIZE: 3/8 (0.375 IN.) IN |
| NSN | 5330-00-141-2997 |
| CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3231 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| BOLT CIRCLE DIAMETER | 1.250 INCHES NOMINAL IN |
| OVERALL WIDTH | 1.810 INCHES NOMINAL IN |
| BOLT HOLE QUANTITY | 2 |
| SIDE RADIUS FROM GASKET CENTER | 0.500 INCHES NOMINAL IN |
| MATERIAL | RUBBER SYNTHETIC AND ASBESTOS OVERALL |
| OUTSIDE CORNER RADIUS | 0.280 INCHES NOMINAL IN |
| STYLE DESIGNATOR | NON-CIRCULAR |
| FSC APPLICATION DATA | ENGINE,RECIPROCATING,AIRCRAFT |