PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6075-4
6075-4 ✓ Verified by PartsTable
Tactic · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

SOCKET,PLUG-IN ELECTRONIC COMPON. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-087-4652, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6075-4
NSN: 5310-00-087-4652
FSC: 5310
CAGE: 07464 — BADGER FIRE PROTECTION INC (USA)
SPECIFICATIONS
general_characteristics_item_descriptionBRASS MATERIAL;CONE SHAPED,1.245 IN. O/A LG,SMALL END OD 0.585 IN. ID 0.438 IN.,LARGE END ID 0.845 IN. THD EXT 1.125-18 UNEF 0.260 IN. THD LG IN
NSN5310-00-087-4652
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 6075-4 · Tactic ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SURFACE TYPE: CHAMFERED OR WASHER FACED
•
MATERIAL: STEEL NUT
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT
•
WIDTH ACROSS FLATS: 0.551 INCHES MINIMUM AND 0.564 INCHES MAXIMUM IN
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
TEMP RATING: 250.0 FAHRENHEIT NOMINAL DEGF
•
THREAD QUANTITY PER INCH: 16
TECHNICAL CHARACTERISTICS (FLIS)
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
MATERIALSTEEL NUT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT
WIDTH ACROSS FLATS0.551 INCHES MINIMUM AND 0.564 INCHES MAXIMUM IN
NOMINAL THREAD SIZE0.375 INCHES IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
TEMP RATING250.0 FAHRENHEIT NOMINAL DEGF
THREAD QUANTITY PER INCH16
END ITEM IDENTIFICATIONMRAP-RG-33 ARMORED UTILITY VEHICLE (AUV); ARMORED MULTI-PURPOSE VEHICLE (AMPV); MULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
BEARING SURFACE FINISH125.0 MICROINCHES
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
SAE J512 4 010111BInterchangeable
interchangeable cross-reference
interchangeable
SAE-J512Interchangeable
interchangeable cross-reference
interchangeable
J512Interchangeable
interchangeable cross-reference
interchangeable
32-2Interchangeable
interchangeable cross-reference
interchangeable
10-327Interchangeable
interchangeable cross-reference
interchangeable
10-0324-0000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6075-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6075-4?
6075-4 is a SOCKET,PLUG-IN ELECTRONIC COMPON manufactured by Tactic.
What parts can replace 6075-4?
There are 33 known substitutes for 6075-4: SAE J512 4 010111B, SAE-J512, J512 and 30 more. Substitute compatibility should be verified for your specific system.
Is 6075-4 still available?
6075-4 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6075-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026