PartsTable
Technical Data Sheet
Download PDF

6073-07 — CAP,GUN DRIVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

6073-07: CAP,GUN DRIVE.

The CAP,GUN DRIVE is a the manufacturer industrial component. Key specifications include radius: 0.496 INCHES MINIMUM AND 0.501 INCHES MAXIMUM IN, material: STEEL OVERALL, groove_depth: 0.875 INCHES NOMINAL IN, recess_depth: 0.106 INCHES NOMINAL IN, hole_diameter: 0.595 INCHES NOMINAL IN, hole_location: 0.688 IN. FROM CENTER LINE OF HOLE TO RIM IN.

This part is cataloged in the U.S. Government catalog under NSN 5310-00-100-1474, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6073-07
NSN: 5310-00-100-1474
NIINs: 001001474, 001035524, 008867407, 011978176
FSC: 5310 — Nuts and Washers
CAGE: 72962 — HARVARD INDUSTRIES INC (USA)
SPECIFICATIONS
radius0.496 INCHES MINIMUM AND 0.501 INCHES MAXIMUM IN
materialSTEEL OVERALL
groove_depth0.875 INCHES NOMINAL IN
recess_depth0.106 INCHES NOMINAL IN
hole_diameter0.595 INCHES NOMINAL IN
hole_location0.688 IN. FROM CENTER LINE OF HOLE TO RIM IN
overall_width6.000 INCHES NOMINAL IN
heat_treatmentAS FABRICATED
hardness_rating38.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
metal_thickness0.179 INCHES NOMINAL IN
outside_diameter0.888 INCHES NOMINAL IN
style_designatorCURVED BASE
NSN5310-00-100-1474
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 6073-07 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
RADIUS: 0.496 INCHES MINIMUM AND 0.501 INCHES MAXIMUM IN
•
HEAT TREATMENT: AS FABRICATED
•
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: CONCAVE
•
OUTSIDE DIAMETER: 0.888 INCHES NOMINAL IN
•
RECESS DEPTH: 0.106 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.232 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
RADIUS0.496 INCHES MINIMUM AND 0.501 INCHES MAXIMUM IN
HEAT TREATMENTAS FABRICATED
HARDNESS RATING38.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORCONCAVE
OUTSIDE DIAMETER0.888 INCHES NOMINAL IN
RECESS DEPTH0.106 INCHES NOMINAL IN
MATERIAL THICKNESS0.232 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
3M348L7Reference document
Same NSN cross-reference
Reference document — Secondary reference
TLN1020L7WReference document
Same NSN cross-reference
Reference document — Secondary reference
K19701P7Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 6073-07?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6073-07?
6073-07 is a CAP,GUN DRIVE.
What parts can replace 6073-07?
There are 3 known substitutes for 6073-07: 3M348L7, TLN1020L7W, K19701P7. Substitute compatibility should be verified for your specific system.
What is the NSN for 6073-07?
6073-07 is cataloged in the U.S. Government catalog under NSN 5310-00-100-1474. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6073-07

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.