PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6070160T
6070160T ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, outside_diameter: 1.625 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 1.375 INCHES NOMINAL IN, peripheral_diameter: 1.125 INCHES NOMINAL IN, center_hole_diameter: 0.875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-864-0309, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6070160T
NSN: 5330-00-864-0309
FSC: 5330
CAGE: 5F573 — GREENE TWEED & CO INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
outside_diameter1.625 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter1.375 INCHES NOMINAL IN
peripheral_diameter1.125 INCHES NOMINAL IN
center_hole_diameter0.875 INCHES NOMINAL IN
cross-sectional_height0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
cross-sectional_thickness0.005 INCHES NOMINAL IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
NSN5330-00-864-0309
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6070160T MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
OUTSIDE DIAMETER: 1.625 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.005 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 1.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC OVERALL
OUTSIDE DIAMETER1.625 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.005 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
APERTURE DIAMETER1.375 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
6070Interchangeable
interchangeable cross-reference
interchangeable
ST1228Interchangeable
interchangeable cross-reference
interchangeable
ST784Interchangeable
interchangeable cross-reference
interchangeable
2-105Interchangeable
interchangeable cross-reference
interchangeable
ASTM B221Interchangeable
interchangeable cross-reference
interchangeable
Q10-46E4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6070160T?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6070160T?
6070160T is a GASKET.
What parts can replace 6070160T?
There are 23 known substitutes for 6070160T: 6070, ST1228, ST784 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6070160T?
6070160T is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-864-0309. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6070160T

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026