PartsTable
Technical Data Sheet
606504 ✓ Verified by PartsTable
Equip · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The equip® Cat.6A S/FTP Patch Cord is composed of preeminent materials and fully-examined to conform with industrial standards. Offering higher bandwidth and better signal-to-noise margin, the Cat.6A cable is able to deliver ultrahigh and error-free performance in the most demanding network environments, specially for 10G application This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-321-5612, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
606504
NSN: 5340-00-321-5612
FSC: 5340
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
length20.000 FEET NOMINAL FT
materialALUMINUM ALLOY 7075
leg_thickness0.090 INCHES NOMINAL IN
heat_treatmentT-6 SOLUTION HEAT TREATED
overall_height2.030 INCHES NOMINAL IN
first_tip_styleSQUARE W/ INNER AND OUTER CORNER RADII
top_flange_width4.240 INCHES NOMINAL IN
basic_shape_styleT SHAPE
fabrication_methodEXTRUDED
left_top_inside_angle90.0 DEGREES NOMINAL
first_tip_inner_radius0.032 INCHES NOMINAL IN
first_tip_outer_radius0.032 INCHES NOMINAL IN
NSN5340-00-321-5612
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 606504 MFR: Equip ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
AMS-QQ-A-200/11Interchangeable
interchangeable cross-reference
interchangeable
60-6504Interchangeable
interchangeable cross-reference
interchangeable
19A405Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 606504?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 606504?
606504 is a SUPPORT,STRUCTURAL COMPONENT,AIR manufactured by Equip.
What parts can replace 606504?
There are 3 known substitutes for 606504: AMS-QQ-A-200/11, 60-6504, 19A405. Substitute compatibility should be verified for your specific system.
What is the NSN for 606504?
606504 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-321-5612. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 606504