PartsTable
Technical Data Sheet
Download PDF

60611-1 — SHAFT,STRAIGHT

✓ Government record, cited
Equip · NUT WASHER
PRODUCT OVERVIEW

60611-1: SHAFT,STRAIGHT.

The equip® Cat.6A S/FTP Patch Cord is composed of preeminent materials and fully-examined to conform with industrial standards. Offering higher bandwidth and better signal-to-noise margin, the Cat.6A cable is able to deliver ultrahigh and error-free performance in the most demanding network environments, specially for 10G application This part is cataloged in the U.S. Government catalog under NSN 5310-00-208-3356, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
60611-1
NSN: 5310-00-208-3356
NIINs: 002083356, 004064914
FSC: 5310 — Nuts and Washers
CAGE: 65263 — REALIST INC DAVID WHITE INSTRUMENT DIV (USA)
SPECIFICATIONS
materialSTEEL COMP 303
end_similarityNOT IDENTICAL
overall_length3.500 INCHES NOMINAL IN
surface_finish32.0 MICROINCHES
first_end_stylePLAIN
second_end_styleSLOTTED
first_end_diameter0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
second_end_diameter0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
second_end_slot_depth0.060 INCHES NOMINAL IN
second_end_slot_width0.062 INCHES NOMINAL IN
material_document_and_classificationQQ-S-764,CONDITION A FED SPEC SINGLE MATERIAL RESPONSE
NSN5310-00-208-3356
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 60611-1 · Equip ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNS
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
DRIVE POINT WIDTH: 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
NUT DIAMETER: 0.550 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
•
DRIVE POINT DEPTH: 0.031 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
•
NUT THICKNESS: 0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUNS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
DRIVE POINT WIDTH0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
NUT DIAMETER0.550 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
DRIVE POINT DEPTH0.031 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
NUT THICKNESS0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
SURFACE TREATMENTLACQUER OVERALL
DRIVE POINT QUANTITY2
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 60611-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60611-1?
60611-1 is a SHAFT,STRAIGHT manufactured by Equip.
What is the NSN for 60611-1?
60611-1 is cataloged in the U.S. Government catalog under NSN 5310-00-208-3356. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 60611-1